Camera with telecentric lens

Basler Vision & Control piA2400-17gm vicotar T201/0,15

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. Bedpfjxp Rywex Ag Nscw turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Year of construction: 2001, condition: good (used), Data will follow... Bsdpoydni Hefx Ag Necw

Condition: used, total height: 1,780 mm, total length: 2,720 mm, total width: 1,910 mm, Empty weight: 2.500 kg Price: On request Bcsdpfx Agjwniacj Now - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 750 - Z-axis travel [mm]: 340 - Table width [mm]: 600 - Table depth [mm]: 300 - Max. grinding wheel diameter [mm]: 355 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - Transport dimensions: 2725mm x 1910mm x 1780mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2004, Clamping area 630 x 500 mm X axis - 630 mm Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Spindle taper ISO 40 Control: Mazatrol 640 M 5X Equipped with: Bsdpfx Agsxdfiis Njcw Coolant through spindle (20 bar)

Condition: good (used), Distance between points 1000 mm Stitch height 230 mm Main motor power 9.2 Kw Working wheel dimensions (h x w x d x w) 500x80x203.2 mm Bcodpjtrgnzofx Ag New Ø max to grind 460 mm Tailstock cone MORSE 4 MORSE 5 tailstock nose cone Max. Z-axis travel 1115 mm Max. X-axis travel 260 mm Approx dimensions (length x width) 440x370 cm Approx. weight 4700 Kg

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Refurbished in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Bedpowp E Rgofx Ag Necw Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Spindle speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: ready for operation (used), Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible. Bodpfxsp T Uphe Ag Nocw

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, Bcjdegynw Depfx Ag Nsw 2; 2S; 3; 3S; 6 and UC200/400

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device Bodswrmcpepfx Ag Nscw - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, turning length 5450 mm swing diameter over bed slide 1250 mm swing diameter over support 860 mm Bcsdpjyk H Nfofx Ag Now control Siemens 840 D spindle bore 163 mm faceplate diameter 1000 mm feeds -stepless- 1 - 400 mm/min center height over square guideway 630 mm workpiece weight max. 10000 kg Equipment/accessories: - 2 bezels - Tailstock - main engine with frame - Fixators - Documentation