300/050 Unilog 4000

BATTENFELD

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Electric machines Year of construction: 2007 Clamping unit Godpfjxdk Ausx Af Asbl Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg Further information: BATTENFELD EM 30/55 UNILOG B6 All-Electric Precision Injection Moulding Machine The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance. The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing: * very low energy consumption * high repeatability and precision * quiet machine operation * low maintenance requirements The machine is especially suitable for: * technical plastic parts * medical products * electronic components * small precision parts Thanks to its all-electric drive technology, the machine offers: * significantly lower energy consumption compared to hydraulic machines * clean production environment * stable cycle times * precise dosing and excellent process stability The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management. With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year. The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Gbsdpsycuuyofx Af Ajl Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control Gedpfewl Rucex Af Asbl * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: used, Year of construction: 2013, clamping force: 2,400 kN, screw diameter: 55 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, ejector force: 59 N, Clamping force: 240 t Year of manufacture: 2013 Injection unit .../1330 Screw diameter: 55 mm Specific injection pressure: 2041 bar Injection volume: 653 ccm Screw L/D ratio: 22 Tool clamping system 240/... Clamping force: 240 t Mould platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Mold height: 350 mm Opening stroke: 725 mm Gjdpoyvtu Hjfx Af Ajbl Max. platen distance: 1075 mm Ejector stroke: 200 mm Weight: 10,000 kg Dimensions (m) L x W x H: 5.5 x 1.8 x 2.4 m Year of manufacture: 2013 Control: Unilog B6

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm Gjdpfob U Hwpsx Af Asbl hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: good (used), Year of construction: 2011, clamping force: 240 kN, screw diameter: 50 mm, displacement volume: 540 cm³, injection pressure: 2,470 bar, injection weight: 491 g, mold height (min.): 350 mm, Battenfeld HM 500/3400 Injection Moulding Machine General Specifications Clamping force: 240 t Year of manufacture: 2011 Control system: Unilog B6 Injection Unit Unit designation: ... / 1330 Screw diameter: 50 mm Injection pressure: 2470 bar Injection volume: 540 cm³ Gsdpfeyzzkgjx Af Aobl Screw L/D ratio: 22 Clamping Unit Clamping system: 240 / ... Clamping force: 240 t Platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Ejector stroke: 200 mm Mould height: 350 mm Opening stroke: 725 mm Max. daylight (max. platen distance): 1075 mm Dimensions and Weight Weight: 10,000 kg Dimensions (L x W x H): 5.5 x 1.8 x 2.4 m

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Gbsdpjk Rnq Nofx Af Ael Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Gjdjh Rawbspfx Af Aobl Closing 45 TOnnen, tie-bar-less Scrow 22 mm YEAR 2004 CC 200

Year of construction: 2005, condition: ready for operation (used), Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible. Gedpfoy Nnadjx Af Asbl

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Gbodpfsy Dqhaex Af Asl Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Gsdjg Emvhepfx Af Aobl Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Gbedpfjy Dqhgjx Af Asl Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Gjdpfx Afsy Dqfxs Ajbl Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Gbodpfxeuh U Ize Af Ael Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Gedpjy Dqf Sjfx Af Ajbl Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request