Band saw

Behringer HBP 510 723 GA

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Iaodpfeu U Narsx Adwsl Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Iajdpfxevpafyo Adwel Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Ijdpfx Adsv U Ea Hjwjal VACAM CNC Control. Short piece removal.

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. Ijdoxmvm Ropfx Adweal INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Iedpfxev U Ebwe Adwsal Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Condition: used, Total power requirement 12 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 3,1 x 5,9 m saw band length 6300 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat Iaedpfx Adjv Aya Rswjl 620 x 400 mm capacity 45 degrees: flat 450 x 400 mm cutting range 30° flat 300 x 300 mm cutting speed 20 - 140 m/min feeding length 3000 mm Control unit NC Coolant Oil mist and not white water

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Iedjig T Amopfx Adwsal Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Iodpfottbf Rsx Adweal Technical data: Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: new, functionality: fully functional, Year of construction: 2025, This machine convinces with a top price-performance ratio and CE standard. You will be surprised. DNE laser cutting machines for professional use in industry and trade. We offer you an absolute top product in terms of reliability and cutting performance tailored to your needs. Our German service team ensures smooth installation and commissioning of the laser cutting system as well as subsequent training. We also carry out service and maintenance work. You can also contact us if you are looking for financing. Iaodpfeq U A H Aex Adwel You are welcome to convince yourself of the statements made during a visit and demonstration. A 45-degree laser cutting head is also available for processing welding bevels or countersinks. The laser cutting machines are available in the following processing sizes: Sheet metal nominal dimension X 3000 mm x1500 mm, 4000 mm x 2000mm, 6000 mm x 2000mm, 6000 mm x 2500mm. Laser power from 2000 watts to 15,000 watts is available.

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Ijdpfowuqbbsx Adweal Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320