CNC Lathe

SCHAUBLIN 125-CCN R-T

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Gjdpfxsx Upuge Ah Hott Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Godpfx Aswl An Ioh Hstt Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection Gjdpfx Ahepy Elds Hjtt - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, Technical details: measuring range Y-axis: Höhe: 0 - 600 mm interface: RS232 weight: 24 kg power consumption: 43 Watt Floor Space WxD: 0,237 x 0,448 x H: 1,013 m High-precision height measuring device Linear Heigth with a glass scale for high accuracy. With LCD display and keypad. This is a table-top device. The main unit can be easily moved in a semi-floating position on a measuring plate using a push-button (float switch). The carriage can perform both automatic and manual movements. incl. eccentric probe at the tip with a ball Ø 4.5 mm Data output RS-232C interface the measuring carriage is guided by roller bearings, motor-driven and/or manual Measuring system - glass measuring system (incident light method) Compressed air supply via built-in compressor Operation via control panel (with graphic display) with granite plate without table Gtodpfjxcvqnjx Ah Het *

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Gsdpfx Asuzlh Ijh Hstt

Condition: excellent (used), Year of construction: 2014, operating hours: 5,650 h, functionality: fully functional, machine/vehicle number: 243-0011, CNC AUTOMATIC LATHE TORNOS EVODECO 16/10 with bar-feeder LNS Fanuc 31iB - 5646 hours Manufacturing origin CH Voltage 400 V Netweight 2700 kg Dimensions 2135x1250x2114 mm TECHNICAL DATA Number of axes 10 Number of spindles 2 Main spindle Maximum bar diameter 16 mm Maximum machining length 180 mm Spindle speed 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Counter spindle Maximum bar diameter 16 mm Spindle speeds 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Tool gang 1 Number of positions 5 Number of motorized positions 3 Rotating tool speed 8'000 min-1 Tool gang 2 Number of positions 5 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 End attachment Number of positions 4 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 back operation Number of positions 6 Number of motorised positions 6 Rotating tool speed 8'000 min-1 Power supply Supply voltage 400V Errors and omissions excepted-data given without obligation Gtodjkhnqgepfx Ah Het

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Gsdsgv I Unjpfx Ah Hett Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Gtjdpfx Aheqn E U To Hst

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM Gtodpexpqm Rjfx Ah Hst 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: good (used), Year of construction: 1999, Machine has 12,300 operating hours Gedpfow Rm Tdjx Ah Hjtt Gildemeister NEF 320 / cycle lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Accessories,