Machining center

BIESSE BIESSE Rover A G 2243 FT

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total height: 7,385 mm, total width: 1,471 mm, total length: 3,275 mm, 8 Kardex Megamat RS 350 vertical carousels in excellent condition. The installation includes 8 units manufactured between 2013 and 2018. Available in three height options: 7185 mm, 7384 mm, and 7585 mm. Each vertical carousel is configured with 34, 35, or 36 trays. For more details or inquiries, please do not hesitate to contact us. Kodpfx Adsv Svmrewodg

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports spindle motor 5,5 kW hydraulic motor 2,2 kW Kdjdpfsp Dt Twsx Adwjg

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Kdodpfsw Nbacsx Adweg Final length: max. 6,100 mm

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Kdedpfswx Aaqox Adwog Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2014, Coffee Cartridge Filling and Packaging Machine Complete and in good working condition Kdedpfxoucf S Te Adwog Overhead hopper feed. Automatic online depositor Speed 300 packs / hour Complete with Simens Touch Screen Controller Hot melt carton gluer

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999 Kedpfx Ajtltl Hedwjdg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter Kdedpjmgc I Njfx Adwsg - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Kodpfx Ajd Ixadsdwedg Weight (kg) 5000

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Kjdpsw Tivgjfx Adwsdg Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: good (used), CNC Machining Center for Drilling and Milling Operations on Wood Panels, Derived Materials, Plastics, and Non-Ferrous Alloys Precise and highly reliable thanks to high-quality components, this machine is ideal for both craftsmen and industrial manufacturers aiming to increase flexibility and production quality. The main structure is made of a single welded steel base frame, constructed with thick-gauge steel plates. TECHNICAL SPECIFICATIONS • Working area X - Y - Z: 6,170 x 1,380 x 180 mm • Axis stroke X - Y - Z: 6,635 - 1,780 - 250 mm • Axis speed X - Y - Z: 100 - 100 - 30 m/min • Worktable: 10 bars • Bar carriages: 3 • Vacuum modules: 3 per bar • Pendulum processing up to: 2,975 mm • Two independent work zones allow simultaneous processing of two identical, mirrored, or different parts • Lifting device for easy positioning of heavy and large panels • 5-sided machining capability • "C-shaped" open frame structure • HSD routing unit • Air cooling system • Inverter included • Tool magazine: 1 with 10 positions • Drilling unit: • Vertical drilling spindles: X = 7, Y = 7 • Horizontal drilling spindles: X = 2+2, Y = 1+1 • Integrated saw blade: Ø 120 mm • Control system: NC 500 based on PC • Easy programming and file import Kdodpfx Astuxa Hjdwjg • Remote control panel/console • Teleservice and video diagnostics for real-time support • Automatic guide lubrication system • Vacuum pumps: 2 x 100 m³/h • Chip conveyor belt • Centralized extraction duct • Extraction ports: 1 x Ø 250 mm • Safety devices: • Side protective curtains for the working unit • Perimeter safety guards with access door • Total installed power: 25 kW • Compressed air consumption: 400 NI/min • Operating pressure: 6.5 / 7.5 bar • Air consumption for extraction: 3,816 m³/h • Machine dimensions: 8,300 x 4,020 x 2,730 mm (h) • Machine weight: 4,100 kg + 600 kg (electrical cabinet) • Included documentation: user and maintenance manual, software manual, spare parts catalog, electrical diagram, CE declaration of conformity.