TEST. SPECIAL 6 CHUCKS CONNECTION 3 LINEAR OUTPUTS PAS 57

BIESSE

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots Gbsdpfx Ahszmtlksljr 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: used, Year of construction: 2011, total height: 2,550 mm, total length: 5,600 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 65352 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool holder: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 1.7 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 Gjdpfozuazujx Ahlebr - └ Brand: Busch - └ Type: MM1322AVM - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 0 - └ Oil free: Yes - Tools included: Yes - Table length [mm]: 3750 - Table width [mm]: 1560 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Z-axis maximum stroke [mm]: 324 - Installed length [mm]: 6465 - Installed width [mm]: 4794 - Installed height [mm]: 2550 - Transport dimensions: 5600mm x 2250mm x 2550mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 378 mm, number of axes: 3, spindle motor power: 13,200 W, spindle speed (max.): 24,000 rpm, This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. • Maximum piece clearance: 170 mm • Axis speeds: X 85 m/min, Y 60 m/min, Z 20 m/min • Base: Electro-welded closed-circuit structure with high-thickness steel plates • Axis drives: X with two independent brushless motors and helical rack & pinion; Z with preloaded ballscrew, ISO5 precision • Work table: Phenolic laminate with 30 mm grid vacuum system; vacuum steps every 150 mm; M8 threaded inserts for templates/fixtures • Main electrospindle: 13.2 kW (17.7 HP), HSK F63, air-cooled, 1,000–24,000 rpm Gbodpfozt S Taox Ahlor • Tool magazine: 8-position revolver on Y-carriage; max tool diameter 110 mm; max tool weight 7.5 kg (32 kg total magazine) • Tool measurement: Digital presetter for tool length measurement up to 130 mm diameter • Control system: BH660 PC-based with Windows Real Time (WRT); CPU Intel Core i5 or better; 8 GB RAM; 128 GB SSD or better; 21.5" LCD monitor • Power supply: 380/400/415 V, 50/60 Hz • Automatic lubrication system for moving parts • Software: bSolid 3D CAD-CAM for design, simulation, and process management • Connectivity: Industry 4.0 integration via TCP/IP and OPC-UA Additional equipment • Vacuum pump: 250 m³/h, dry-running • Air conditioner for the electrical cabinet • Safety guarding: 2 m high protection nets and front vertical photocells

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers Gsdpfx Ahjzt Dkqeljbr • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine ilability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior ilable for collection from the beginning of September 2026.

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm Godpszt Dh Njfx Ahlobr • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2023, Edgebander manufactured in 2023. This BIESSE Akron 1440 A features a panel height range of 10-60 mm and an edge height of 14-64 mm. It supports roll edge thickness from 0.4-3 mm and strip edge thickness from 0.4-12 mm. The machine includes a chain feed speed of 12 m/min and is equipped with an NC axis package for automatic setup. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. edge banding machineBrand: BiesseType: Akron 1440 Ayear of manufacture: 2023Technical data: • Panel height: 10–60 mm • Edge height: 14–64 mm • Roll edge thickness: 0.4–3 mm • Strip edge thickness: 0.4–12 mm • Panel overhang beyond the chain: 25 mm • Panel length: 140–3200 mm • Minimum panel width (with panel length 140 mm): 85 mm • Minimum panel width (with panel length 250 mm): 50 mm • Chain feed speed: 12 m/min • Distance between panels: 450–650 mm • NC axis package for automatic machine setup • Return conveyor installation kit • Notes: • Minimum panel height 8 mm with max edge thickness 1.5 mm. • Values marked “depending on the selected working units.” Max permissible feed speed 12 m/min. • Aggregates/working units: • Anti-adhesive spraying unit ADZ02 • Pre-milling unit RT02 • Two high-frequency motors, each 1.8 kW, 12,000 rpm • Gluing unit VC-511 • Processes EVA and PUR granulated adhesives • Adhesive container capacity: 1.5 kg • Pressure zone • 1 driven pressure roller, Ø 100 mm, independently adjustable pressure • 2nd and 3rd non-driven pressure rollers, Ø 60 mm, anti-adhesive coating, opposing conical, pneumatically adjustable • End trimming unit IT-70-S • Two high-frequency motors, each 0.8 kW, 12,000 rpm • Straight (0°) or inclined trimming, adjustable 0°–15° • Antistatic/cooling liquid spraying unit for end trimming • Fine milling unit RF02 • Two high-frequency motors, each 0.65 kW, 12,000 rpm • Corner rounding unit • Two high-frequency motors, each 0.65 kW, 12,000 rpm • For straight and postforming/softforming profiles on 90° and 180° corners Gsdozt Dfuepfx Ahlebr • Edge scraping unit RB02 • Manual switching between two processing profiles • Glue joint scraping unit RC02 • Buffing unit SZ02 • Two motors, each 0.37 kW, 2,800 rpm • Hot air blower unit PH-501 • Power: 2 kW; continuously adjustable temperature control

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,832 h, Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details. • Year: 2018 (10/2018, per nameplate) • CE • Axes: not applicable • Key parameters: panel thickness 10–60 mm • Key parameters: edge height 14–64 mm • Key parameters: edge thickness 0.4–8 mm • Documents: Nameplate & usage-counter photos on page 2 • Equipment / Units included: Pre-milling unit Gbodpfszt Dfnex Ahljr • Equipment / Units included: Glue unit + end-cutting (trim) unit • Equipment / Units included: Corner rounding unit • Equipment / Units included: Additional interchangeable glue pot • Equipment / Units included: Radius scraper + glue-joint scraper • Equipment / Units included: Polishing / buffing units • Equipment / Units included: Front & rear anti-adhesive spray units • Condition: Very good condition, in daily production use until sale (per seller's statement) • Usage counter: 526,175 panels processed • Usage counter: 351,289 running metres processed (meter reading 14/05/2026) • Consistent with regular single-shift production

Condition: ready for operation (used), Year of construction: 2017, overall weight: 1,650 kg, product length (max.): 4,168 mm, Edgebander manufactured in 2017. This BIESSE Jade 240 features a panel thickness capacity of 10-60 mm and an edge height range of 14-64 mm. It includes a pre-milling unit, glue application unit, and various trimming units for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Jade 240 machine we have for sale. Contact us for further details. Godszt Dfhopfx Ahljbr • Technical data: • Panel thickness: 10–60 mm • Edge height: 14–64 mm • Edge thickness (coil): 0.4–3 mm • Edge thickness (solid strips): up to 8 mm • Feed speed: 12 m/min • Minimum workpiece length: 150 mm • Minimum workpiece width at 150 mm length: 85 mm • Minimum workpiece width at 250 mm length: 50 mm • Pneumatic connection: 7 bar • Glue pot capacity: approx. 2 kg • Glue pot heat-up time: approx. 10 min • Dust extraction connections: 100 mm • Standard units: • Pre-milling unit • Glue application unit • End trimming unit • Flush/profile trimming unit • Corner rounding unit • Radius scraping unit • Glue joint scraper • Buffing unit

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 165 mm, number of axes: 4, This 4-axis BIESSE Rover K1232 was manufactured in 2017. It features an extensive X-axis working range of 3,260 mm and a Y-axis working range of 1,260 mm. The machine is equipped with a tool magazine capacity of 16 positions and an electrospindle power of 19 kW. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover K1232 CNC processing center we have for sale. Contact us for further details. Gjdpfx Ahszt Dcyjlsbr • Machine design: Gantry • Tool magazine capacity: 16 positions • Electrospindle power: 19 kW • Total power: 20 kW

Condition: ready for operation (used), Year of construction: 2017, number of axes: 5, This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details. Gbsdpfxozt Dcts Ahlor BIESSE ROVER A 1643 EDGE - Technical Specification Machine type CNC machining center with edge banding functionModel: ROVER A 1643 EDGEDesigned for machining and edge banding of shaped/profiled panels Configuration shown in the documents indicates a 5-axis setup Working area X-axis working area: 4,320 mm Pendulum working in X: 1,620 mm Y-axis working area: approx. 1,580-1,660 mm Z-axis travel: 180 mm Edge banding X-axis working area: 3,300 mm Edge banding Y-axis working area: 1,540 mm Maximum loading width in Y: 1,900 mm, extendable up to 2,100 mm 5-axis unit 5-axis machining headC-axis: continuous 360° rotationB-axis: continuous 360° rotationB-axis speed: 18 rpmC-axis speed: 18 rpmMaximum spindle speed: 24,000 rpmPower:11 kW in S1 cycle13 kW in S6 cycleMaximum undercut angle: -10°Collision control for the 5-axis unitPrepared for aggregate use on the 5-axis unit Work table and clamping ATS work table8 support beams32 movable carriages32 pneumatic vacuum podsVacuum pods adjustable in 15° stepsPneumatic system divided into 2 working zones in X Vacuum pump capacity: 250 m³/h6 lifting beams for easier loading and unloading28 sensors for detecting lowered stopsStops and positioning8 rear stops8 central stops4 side stops, 2 left + 2 right2 additional side stops4 removable central stops, 2 left + 2 right2 additional central stopsPneumatic positioning and lowering of stops Drilling unit BH 24L drilling head13 vertical independent spindles5 horizontal independent spindlesGrooving saw Ø120 mmMaximum grooving depth: 25 mmSpindle speed programmable up to 6,000 rpm Tool changer 16-position rotary tool magazine Mounted on the X-axis carriage For tools and aggregates Maximum tool/aggregate weight: 7.5 kg Total maximum magazine load: 55 kg Edge banding unit GU60A edge banding unit For panels up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue tank with hot-melt glue systemEdge heating lamp, 600 W NC-controlled edge feeding system Automatic edge cutting Sensor for closed geometric shapes Edge banding accessories 2-roll edge magazine mounted on the X carriage Maximum roll diameter: 800 mm Maximum edge height: 65 mm Corner rounding tool Ø85 mm, HSK F63 Saw aggregate HSK F63 for cuts and grooves, max blade Ø215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with Ø215 mm blade: 68 mm Edge trimming units Combined glue scraping / edge scraping units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment DXF, CIX and BPP import 3D machine simulation Tool management 5-axis machining management by positioning Wizard-based program creation Safety CE compliant Safety mats Safety barriers Safety sensors Modified safety system allowing loading in Y up to 2,100 mm Summary This is a well-equipped BIESSE ROVER A 1643 EDGE CNC machining center with 5-axis machining head and edge banding package. The documents show B and C continuous rotation, 5-axis programming, 5-axis collision control, and a dedicated aggregate flange for the 5-axis unit, so based on these documents it should be treated as a 5-axis machine.