Bodor T2-65-3000W

Bodor T2-65-3000W

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm Dkjdpfx Adjhv Hkaorsr CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Features: Year of manufacture: 2005 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel Dkodpfx Adoypardsrer CIP 4 system Supplied with plate punch and bender The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Dkjdpfx Adswgbxzjrer A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round 7500mm length × 20mm-180mm square automatic loading 3000-6200 Laser head 2½D Dkodjvvlbtepfx Adrsr Selling due to purchase of 3D You can always come and see this machine running.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Dkodpfx Adsg Rgucsrsr Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Dksdpfxet H Nhho Adror Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, functionality: fully functional, LOT OF ~40 LENZE GEAR MOTORS - BULK SALE OPPORTUNITY Complete lot of 40 LENZE gear motors of various sizes and configurations. From an industrial company liquidation (insolvency proceedings) in Spain – the units were in active service in functioning production lines until the plant closed. ═════ WHAT YOU GET ═════ - ~40 LENZE gear motors on 3 pallets - Mixed power ratings: from 0.18 kW to approximately 7.5 kW - Various gearbox types: coaxial, parallel shaft, helical-bevel, and worm gear configurations - Standard mounting: B3, B5, B14 mixed - Some units include integrated brakes - Voltage: 230/400V three-phase, 50 Hz - Mostly IP55 protection class ═════ ABOUT LENZE ═════ LENZE is one of the leading European manufacturers of drive technology, founded in Germany in 1947. LENZE gear motors are known for: - Premium build quality - Long service life - Wide availability of spare parts worldwide - Reusability in industrial applications across all sectors - Excellent resale value compared to other brands ═════ CONDITION ═════ - Used units, removed from working production lines - NOT from breakdowns – plant closure liquidation - Previous owner statement: "older units but functional" - Sold as-is, full inspection welcome - Buyer should test individual units before final use - No warranty implied - Approximately 50-100 different models in the lot ═════ APPLICATIONS ═════ Suitable for: - Industrial revenders and spare parts dealers - Conveyor systems and material handling - Production line maintenance stocks - OEM machinery manufacturers - Industrial repair workshops - Containers to Africa, South America, Asia - Recovery and refurbishment businesses ═════ COMMERCIAL TERMS ═════ - Sale mode: COMPLETE LOT only (no individual selection) - Detailed inventory available upon request (catalog available upon request) - Inspection welcome by appointment - Pickup location: Madrid, Spain - Total weight: ~800 kg (3 pallets) - Loading: forklift required - Payment: bank transfer - Documents: invoice and pallet inventory Dsdpfx Adszbg Upjrskr ═════ WHY THIS LOT IS A GOOD INVESTMENT ═════ A new LENZE gear motor of medium size (1-2 kW) costs €600-1,200 in 2026. Replacement LENZE units have lead times of 4-12 weeks from the factory. This lot provides immediate availability of ~60 functional units with mixed configurations, ideal for: - Maintenance departments that need quick replacements - Resellers building inventory - Refurbishment shops for African and Asian markets Estimated equivalent new value of this lot: €25,000-45,000. ═════ INTERNATIONAL SHIPPING ═════ International buyers welcome. Container loading possible. Buyer arranges transport and customs documentation. We provide a commercial invoice and packing list.

Condition: ready for operation (used), Year of construction: 1983, Offset printing machine ULTRAMAN VII AGS/1983 Maximum sheet size 1120x1600 mm Minimum sheet size 600x800 mm Printing on 5 color groups + 1 dispersion varnish group Dkjdpfx Aey U Ufdjdrsr IR drying alcohol dampening and cooling Quick action plate clamps The machine is in good working condition.

Condition: excellent (used), Year of construction: 2009, operating hours: 93 h, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation system, Ink unit temperature control, Anicolor inking units, Double sheet detection, Side guide control, Blanket washer, Roller washer, Impression cylinder washer, Autoplate system, IR dryer, Extended delivery. Dodpfx Asznl T Asdrskr

Condition: used, Year of construction: 2018, total width: 900 mm, total height: 1,250 mm, Colour: Grey Weight: 800 kg Dimensions (LxBxH): 130 x 90 x 125 cm Price: On request - Details: - └ Description: Bearings sound bad - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 63CE00007-8 - Max. planing width [mm]: 630 - Min. planing height [mm]: 2 - Max. planing height [mm]: 288 - Worktable length [mm]: 860 - Worktable width [mm]: 630 - Planer block diameter [mm]: 100 - Number of cutters [pcs.]: 4 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 160 - Height adjustment: Manual - Options: Braked motor, Digital readout - Voltage [V]: 400 - Current consumption [A]: 17.5 - Fuse [A]: 32 - Transport dimensions: 1300mm x 900mm x 1250mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dksdpfxsyu Sd Ae Adrjr Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels