Screw air compressor

BOGE S 40

Condition: excellent (used), Year of construction: 2000, BOGE S40 screw compressor Technical data Psdpfsvvkyhex Ab Iord Capacity: 4.30m3/min (4300 L/min); 30 KW engine; max pressure: 10 bar; mileage: 10876 h; year: 2000

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Predpfx Ashrkrtsb Isd Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Prsdpfom Sg Hcox Ab Ijd

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Prodpfx Abjiyyndj Ijd Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Prodpfxjpiarns Ab Isd Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Pjdpsqudivsfx Ab Iord

Condition: ready for operation (used), Year of construction: 2007, operating hours: 46,000 h, Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible. Pjdpfx Aot R Trfeb Ierd

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Prsdpfx Aeukcy Esb Ied Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Year of construction: 2002, condition: not inspected (used), C.N.C. MACHINING CENTER WITH 4 INTERPOLATING AXES - ELECTRONIC PANTOGRAPH BIESSE SPA ARROW ATS - NC 1000 YEAR 2002 EXCELLENT STATE OF USE AVAILABILITY AT OUR WAREHOUSES - ALWAYS AND ONLY EXCEPT SOLD Prjdpepciryefx Ab Isd DESCRIPTION : MACHINERY 4 INTERPOLATING AXES WORKING FIELD 3,012 x 1,549 x 270 MM PIECE PASSAGE AXIS TRAVEL X = 4,300 MM; Y/W = 1,600 MM; Z=300 MM MONOLITHIC STRUCTURE MADE OF HEAT-SEALED STEEL WITH THERMAL STABILIZATION X, Y and W AXES SPEED MAX 80 M/MIN; Z MAX 25 M/MIN AUTOMATIC LUBRICATION OF RECIRCULATING BALL BEARINGS AND NUTS CNC CONTROL NC 1000 WITH PC OFFICE WINDOWS AND COLOR MONITOR WORKTABLE NO. 08 BAR TYPE ATS TABLE WITH ELECTRONIC DISPLAYS AND 32 ATS TROLLEYS VARIOUS ATS VACUUM MODULES REAR, INTERMEDIATE AND SIDE REFERENCE STOPS LOW STOP CONTROL SENSORS NO. 01 250 M3/H VACUUM PUMP OPERATING HEAD WITH: - NR. 02 ELECTROSPINDLES P = 13.5 KW (18.4 HP); HSK 63F; V MAX 20,000 R.P.M. CERAMIC BEARINGS AXIS SETTING AND FLOTATION ELECTROSPINDLE (COPYING) EM2 4TH "C" AXIS WITH 0° - 360° ROTATION BY GEARS EM2 NR. 02 AUTOMATIC TOOL CHANGER WITH NR. 10 STATIONS EACH BH24L BORING HEAD WITH 18 VERTICAL, 06 HORIZONTAL SPINDLES AND FIXED BLADE UNIT IN Y SAFETIES CE STANDARDS WITH FRONT SENSITIVE MATS AND ANTI-INTRUSION NETS POWER SUPPLY 400 VOLTS THREE-PHASE, 50 HZ, I=90 A, P=49 KW MAX ELECTRICAL/ELECTRONIC CABINET EQUIPPED WITH AIR CONDITIONER DIMENSIONS 6,900 x 5,300 MM ABOUT WEIGHT 9,000 KG

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Prsdpswa Iz Ajfx Ab Isd Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle