Circular saws for light metal and aluminium - manually - saw blade dia. from 370mm for sale
5
saw blade diameter 400 mm
cutting diameter 130 mm
capacity 90 degrees: flat 220 x 90 mm
829pnh
turning speeds 3200 U/min
saw-blade dia. 400 x 3,2 x 40 mm
motor 400 Volt
total power requirement 3,0 kW
weight 125 kg
range L-W-H 700 x 900 x 1500 mm
Furnishing:
- Precise and accident-free work thanks to cutting from below
- Quick setting for miter cuts
- Workpiece clamping with adjustable vice and pressure piece
- pneumatic tool clamping
saw blade diameter: 450 mm
revolution per minute: 2820 U/min
cutting lenght max.: 5000 mm
cutting length min.: 240 mm
air pressure - required: 6-8 bar
hole of sawblade: 32 mm
mitter cutting - both sides: 45+90 °
total power requirement: ca. 4,6 kW
weight of the machine ca.: 1,1 t
dimension machine xH: 6,05x1,49x1,79 m
- cutting diameter can be seen in a cutting chart of the machine
- clamping pneumatic and horizontal
- pneumatic mist spraying device
- adjustable machine base stands
- material s...
4
Aluminium Underfloor Circular Saw Make Unknown
Technical data:
Saw blade diameter 400 mm
Cutting height
Outer dimensions L x W x H 1050 x 930 x 1700 mm
weight 342 kg
with
- 2 pneumatic vertical clamps
- protective hood
- foot switch
used, at the moment not functional
as spare part donor or for rebuilding
Cjluwbbbm
SPECIAL PRICE as on stock
4
Spindle speed: 4200 rpm
H2ndzat
Trimmed length: 2600 mm
Saw blade diameter: 400 mm
max. cutting height: 138 mm
TECHNICAL SPECIFICATIONS Edging frame length 2600 mm Format sliding carriage length 2600 mm Format sliding carriage width 360 mm Format sliding carriage height 142 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with rip fence 1270 mm Max. Cutting width to the left of the saw blade 3260 mm Trimming length 2600 mm Saw blade inclination 90 - 4...
5
Aluminium cross-cut saw with 400 mm blade diameter Horizontal pneumatic clamping deviceFeed side left, 45° swivel of saw unit (right and left) and 45° manual horizontal swivelWith fog spray deviceThe manual actuator for lowering the saw blade is equipped with a mechanical safety device to prevent any unwanted movement.The angular positioning of the saw blade is achieved by swivelling the support table with locking bolts for 45° (right and left) and manual clamping for the intermediate mitres.
Np...
disk of circular saw-Ø: 370 mm
Psn3bq
cutting area at 90°: 115 mm
cutting area at 45°: 115 mm
engine: 380 V, 4/5 kW
space needed: 1000 x 1200/2200 x 1500 mm
weight: ca. 900 kg
9
Crosscut and mitre circular saw GRAULE ZS 170N
optically and technically very good condition
we sell this item on behalf of a customer, you will get a private bill of sale, no VAT will be charged
cutting height: 170mm at 90°
cutting length: 430mm at 90°
Jo7mei8n
year of manufacture 2002
can be swivelled on both sides, to the left up to 70° and to the right up to 45° with rasters at 90° and at 45° and with a very exact scale
can also be tilted, on one side up to 10° and on the other side up to 45...
5
Ascending saw diameter 600mm, with feed path with adjustable stop
2 vertical pneumatic cylinders.
Works every day
Rvut9cw9
6
2 assembled aluminium circular saws make EISELE type LMS III PV
machine # 2224 + 2225 year of construction 1988
technical data:
saw blade size 400 x 4,0 x 40 mm
cutting range 90° 500 x 140 mm
hor. 45° L + R 400 x 140 mm
vert. 45° L 500 x 90 mm
Blind box profile 500 x 152 mm
(with saw blade 410 mm)
Saw blade speed 2800 rpm.
Drive power 2,6 kW
Weight per piece 670 kg
Outer dimensions per piece 1800 x 800 x 1300 mm
with
- hydr. stepless feed
Ktewj
- spraying device
2 identical saws LMS III PV - m...
6
- Semi-automatic
- Saw blade 420 mm
- Double mitre
- 4 Pneumatic clamps
- Spray lubrication system
- Roller conveyor 300 cm with length stop
- Blow gun
- Protective cap
- Technical documentation
Brn0kf8rg3
- 400V
1
Motor power 2,2 kW
belt opening 180 mm
Hvxxd9i
belt dimensions 350x32x3,4
weight 180 Kg
Speed 2.850 1/min.
Cutting surface 0° 140 / 110x110 / 180x100
Cutting surface 45° right 120 / 100x100 / 150x100
Cutting surface 45° left 120 / 100x100 / 150x100
Cutting surface 60° right
Cutting area 60° left
Description
ROOM ZKSA 402 PM
2 horizontal vices
Standard fog spraying device and carbide blade
Mitre angle engraved
Self-braking motor under 10 seconds
Servopneumatic lowering manual
Technical data:
En...
4
Used ITALMAC Mod. ZETA 400 P Disk cutting-off machine for single head aluminium
Manual blade feed
Eka2n72mq
Pneumatic inclination for cutting 90° - 45° DX - SX and 20° DX
Air vices
Saw blade mm 400 X 3.8
Engine : Hp 3
Lubrication
Well new " CE "from end stock!!
Only Nr.01 availability in ready delivery unless sold.
1
CIRCULAR SAW
Technical characteristics:
*HYDRAULIC AUTOFEED
*DISC DIAMETER 400 mm
Wo8px0ob
4
Aluminium circular sawFabr.KASTO Typ:GKS 400 U-ALU Bj.1997Saw blade diameter 400mmwith straight cut -45 burr.Sawing range:Rundmat Max:130/140mmFlatmat max:260mmX80mmsquare max:120mmX120mmGood condition.
Bcad82g2e
5
Aluminium circular saw Fabr. KALTENBACH type SKL 400 Fabr.# 46620 built in 1977
Technical data:
Saegeblattdrm. 400 mm
Cutting capacity 90 ° round 135 mm
Cutting capacity 90 ° square 120 x 120 mm
Cutting capacity 90 ° flat 70 x 280 mm
Section 45° square 105 x 105 mm
Section 45° flat 55 x 120 mm
Feed speed 0-3000 mm / min
Drive performance 6.0 HP
Weight 650 kg
Size 910 x 1200 x 1700 mm
7z8bqa0an
with
-Pneum.. SEK ´ nkrechtspanner
-Measuring roller conveyor
-Evacuation roller conveyor
used, in ver...
13
Aluminium circular saw Saw blade diameter 90 cm
used, good condition, see pictures
Length 2,4 m
width 1,4 m
height 1,8 m
Saw blade diameter 90 cm
Bev7fn82tz
cutting area 62 x 26 cm
Hydraulic clamping
negotiation price: € 1.500,-- net ex stock
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in ...
4
- Carbide saw blade 400 mm
- Manual head lowering
- Manual turning of the bed for cutting at 45° 0° 45° and intermediate angles on the vertical axis
- Manual side tilting of the heads for cutting between 0° and 45° external angle on the horizontal axis
Cxq0oc98a
- Cast iron plate
- Mechanically controlled protection of cutting area
- Blades lubrication system
- Pair of horizontal pneumatic clamps
- Blade motor power: 2,2 kW
- Blades speed: 3200 rpm
- Power supply: 2,2 kW
- Air consumption: 2 N...
5
Max. Saw blade diameter: 400 mm
Weight: approx. 500 kg
Power input: 2,2 kW
rpm1 : 2800
Protection device
Btvsdjvroi
Pneumatic material clamps
Minimum quantity lubrication device
Table rotatable on both sides with detent points at 45°
Roller conveyor 4 m with digital stop Diethei PD100
+3m discharge roller conveyor
Very well maintained machine complete incl.
suction, many saw blades
Crosscut saw AS-1000
New machine
Saw blade diameter 1000mm.
Pneumatic minimum quantity lubrication (optional).
Hydraulic material clamps (with pressure control).
Hydraulic saw feed (with pressure and flow control).
Fn29w79
Infinitely variable speed control via frequency converter.
3
Dimensions: 1080x900x1760 mm
Btuijyyqca
Weight: 900
Cutting capacity round: 130 mm
Cutting capacity square: 120x120 mm
Rotation speed: 10/20 13/26 15/30 m / min
2
Underfloor circular saw for aluminium make PRESSTA EISELE EMMEGI type 500 SCA
machine # 191446, year of construction 1987
Technical data:
max saw blade diameter 500 mm
Speed 2890 rpm.
cutting capacity 90° e.g. 170 x 150 mm
or e.g. 100 x 250 mm
cutting range 45° e.g. 170 x 165 mm
or e.g. 130 x 150 mm
cutting range 20° e.g. 150 x 60 mm
or e.g. 90 x 90 mm
Weight approx. 520 kg
Drive power 4,0 kW
with
- Minimum quantity spray device
- 2 vertical clamps
Nfrhkeg
- Mitre cutting device
used, in good co...
6
OZCELIK ALUMINIUM CROSSCUT SAW
TYPE VEGA II M
- Saw blade 400 mm
- Double mitre
Oxbkt
- 4 Pneumatic clamps
- Spray lubrication system
- Roller conveyor 300 cm with length stop
- Blow gun
- Protective cap
- Technical documentation
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
5
Semi automatic rising blade cold saw with manual rotating table.
Two horizontal hydraulic vices for secure clamping.
Technical data : saw blade diameter max 425mm - 10 cutting speeds (14 - 220m/min)
Egr8aiosk
5
Aluminium with a saw blade Of 400mm
Eqcs3tt
Miter saw with a saw blade diameter of 600mm (optional 800mm)
Umoensbh
- manual miter adjustment
- Pneumatic table clamping
- Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable)
- Two-handed safety control
Optionally available:
- Automatic miter adjustment
- Roller conveyor with length stop or positioning system
- Design as a sawing machine
- Preload magazine
- Horizontal clamping device
- Suction system
- Other accessories on request
We ...
3
Aluminium circular saw semi-automatic machine make KALTENBACH type SKL 350
machine. # 12513 Year of construction 1965
technical data:
Saw blade diameter 350 mm
cutting range 90
round 135 mm
L8onupbj
square 120 mm
flat 70 x 280 mm
Cutting range 45
square 105 mm
flat 55 x 210 mm
Saw blade speed 2250/ 4500 m/min
Drive power 5 /6 PS
weight 650 kg
outer dimensions approx. 1200 x 1200 x 1500 mm
with
- manual material clamping
- turnable table for mitre cuts
used, in good condition
Crosscut saw AS-600 Vorfürmaschine
Incl. blade diameter 600 mm.
Bfomweh7a2
Incl. Automatic minimum quantity lubrication.
Incl. smooth lift and manual length stop.
Machine can be visited, by appointment, on the spot.
Used Circular saws for light metal and aluminium - manually - saw blade dia. from 370mm
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
