Chamber dryer

Brunner Hildebrand BTV 5

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas Rjdpfxov Si Szo Abhsw 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 Rjdjv Hygfjpfx Abhew A second ironing dryer of a similar design is available.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark Rodpfx Ajtutwvjbhow

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device Rjdpfx Aey R Ha Sobhjw - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system - Stacking dimensions: 530 x 105 x 115 cm - Stacking volume: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Rodpfx Ajwxdqkjbhjw Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table Rsdpfx Abopu Anmehjw - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Rodpfow I E Dvex Abhow

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min Rsdpfx Asw R Hh Usbhow - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: good (used), Obel Pedersen Rsdpfedybr Rex Abhjw High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, HF generator T20 V and water cooling System has been dismantled.

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Rsdehbp Ifjpfx Abhow Dimension : 2,12m x 0,73m x 1,55m