Debarker

Cambio 75

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Cpsdpfxjxr Ityj Agkow Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm Cpedpfxjx Rn Udo Agkjw 2x200 kW Complete control system Complete hydraulics/control cabinets

Condition: excellent (used), Gearbox 71-75 Log diameter 750 mm Cpjdew Syn Repfx Agksw weight 10 t

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Cpsdsv Irvujpfx Agkew

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: Cpjdpfx Agsq Iivajksw - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Cpodpfew Emhfsx Agkew Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Cpodpfx Aehclffogksw Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Cedpfx Agetk N Dkekepw

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Cjdjw Hngljpfx Agkspw

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Csdpfjvpvp Ijx Agkspw