Punching unit

CEWE PA14-150 2GN1 K27

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net Kjdpfxjff Sbis Adwowt -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition Kwsdpfx Adodzqblowst The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Kwodpfjdx Rzmjx Adwot coil diameter: max. 650 kg. strip metal width: max. 100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. Kjdpfx Adov Stfrewswt straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: good (used), Year of construction: 1985, Main drive motor: 400 V, 055 kW, 2800/min Kwodpfxsdzud Do Adwjt Thread dimameter range: M 1- M 6 Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: good (used), Year of construction: 1995, Calender with 3 rollers Fasti main features: Length 1860 Kjdpfjf Slq Ssx Adwewt Sheet metal thickness max. mm. 0,75 Upper roller diameter mm. 40 Several LED ceiling light templates

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Kwodpfx Adsw Dd Hpjwjt Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), Year of construction: 1995, Chamfering unit, suitable for BIHLER GRM 50 or GRM 80 Kjdpsi Tza Uefx Adwowt wire diameter range: 2,5 - 5,5 mm

Condition: new, Year of construction: 2025, Automatic roofing sheet forming machine for aluminum or galvanized steel sheet with a sheet width of 1000mm. Includes automatic sheet decoiler, Siemens control system, and technical documentation. Ksdpfx Asw A Rt Hedwswt

Condition: used, Year of construction: 1990, machine/vehicle number: 456 / 378, Ref. No. 25062 Technical Data: - With ECKOLD clinching pliers, type MZ + punching device - Working pressure continuously adjustable up to max. 500 bar - Pressing force of pliers: 25 kN - Single stroke or continuous operation - Stroke rate infinitely variable - Hose package unit – pliers approx. 4 m Kwjdpfx Adsw Dc Ufewst - Hydraulic oil capacity: 15 l - Drive: 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg