Tipper

Cheval Liberté Debon 155x305cm 2,0t E-Pumpe Gitter 60cm AKTION

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2025, brakes: other, New series! Rear tipper with standard electric tipping function and low loading height, braked tandem high-bed trailer with all-round foldable and removable aluminum drop sides, welded, hot-dip galvanized steel frame, wooden floor covered with steel plate, lashing points on the sides of the floor in a V-groove, automatic jockey wheel, 13-pin electrical system with reversing light, low chassis. Plus freight to Gera and vehicle registration document €250 net. Dlsdpfeghpc Nox Addea Optional accessories available at extra charge: mesh sides, tarpaulin and frame, 100 km/h equipment, integrated loading ramps, support stands, etc. Delivery available at extra cost! Financing / leasing possible. Pictures are for illustration only, some shown with optional accessories at extra charge!

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Dlsdjd Szf Nopfx Addja Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: new, Year of construction: 2025, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Length without shoe 165 cm Weight 360 kg Included Working hose Dljdpfstuiqyex Addsa Air hose Spray gun Hose cleaning ball Shneka 2L6

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop Dljdpjhyuglofx Addoa

Condition: new, saw blade diameter: 550 mm, - Saw blade 550 mm - double miter - 4 pneumatic clamps - Hydrocheck system - mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop Dledpfxehzuu Ne Addja - blowgun - protective cap - documentation - 400V

Condition: new, - Saw blade 550 mm - double miter - 2 pneumatic clamps - Hydrocheck system - mist lubrication system - Roller conveyor with longitudinal stop Dlsdpegg Nyrofx Addsa - blow gun - protective cap - documentation - 400V

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication Dlodpfxjkckx Ue Addsa 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: new, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2024, brakes: other, PROMOTION until May 31, 2025, electric tipping operation for only €495.00 net! Dlsdpfx Ajghpcpjddea New series of rear tippers! Two-axle, braked rear tipper high-loader with aluminum side walls that can be folded down and removed on all sides, wooden floor covered with sheet steel, welded, hot-dip galvanized steel frame, automatic support wheel, 6 lashing brackets in the floor on the side in a V-groove, 13-pin electrical system with reversing light, hydraulic hand pump, low chassis. Plus freight to Gera and vehicle registration document €200 net. Optional accessories for an additional charge: leaf guard, tarpaulin and bows, 100 km/h equipment, integrated loading ramps, parking supports, etc. Delivery possible for an additional charge! Leasing and financing available. Images are exemplary, some with accessories for an additional charge.

Condition: new, functionality: fully functional, power: 8.6 kW (11.69 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, cabin, The GG800NXC Expandable Tracks Movable Arm Operating weight: 1,000 kg Bucket capacity: 0.025 m³ Bucket width: 380 mm Engine: Gunter Grossmann Diesel Euro 5 Rated power: 8.6 kW / 3600 rpm Main pump: Wayne Hydraulic Hydraulic pressure: 16 MPa Swing motor: Dalí Travel motor: Dalí Travel speed: 1.5 km/h Max digging depth: 1,650 mm Max digging height: 2,610 mm Dedsxuwuxopfx Addsla Max dumping height: 1,850 mm Max digging radius: 2,890 mm Swing radius: 360° Max dozer blade lift height: 345 mm Max dozer blade digging depth: 255 mm Length: 2,770 mm Width: 930 mm Height: 2,100 mm Track length: 1,230 mm Chassis width: 896 mm Track width: 200 mm is a compact, professional mini excavator ideal for precise operation in hard-to-reach areas. The enclosed cab provides the operator with comfort and protection in all weather conditions. With a weight of 1,000 kg and a 0.025 m³ bucket (380 mm wide), it allows efficient excavation in confined spaces. Powerful and environmentally friendly performance The GG800NXC is powered by an EU Stage V-compliant Gunter Grossmann diesel engine (8.6 kW at 3,600 rpm), providing reliable and eco-friendly operation. The 16 MPa Wayne hydraulic system and Dali motors ensure smooth, responsive controls with a travel speed of 1.5 km/h for optimum mobility. Wide working range It offers a digging depth of 1,650 mm, a height of 2,610 mm, and a 360° swing range for maximum maneuverability. A dumping height of 1,850 mm and a dozer blade lift height of 345 mm enable versatile earthmoving in varying conditions. Compact and reliable With dimensions of 2,770 x 930 x 2,100 mm, the GG800NXC is easy to transport and highly agile. Its robust construction and enclosed cab make it ideal for year-round use by contractors, landscapers, and private users seeking a dependable mini excavator.

Condition: new, - Saw blade 400 mm - double miter - 2 pneumatic clamps - mist lubrication system - Material table with longitudinal stop - blow gun - protective cap - documentation - 400V Dedpfx Ajgg N Dreddsla