Eccentric press double column

Chin Fong OCP-260N

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0540/98, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. Bcedeicbbzopfx Ag Njw The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Bodpot Ucpbjfx Ag Nscw Inquire by phone or email!

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW Bjdpjvuud Usfx Ag Nocw weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Bodewm Nm Tepfx Ag Njcw

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Bsdpfjwm Nm Hox Ag Nscw

Condition: used, SCHULER TYPE 315-400 Bsdpfsrgp N Hsx Ag Nscw PRESSURE: 315t LENGTH OF STROKE: 30-160mm STROKES PER MIN: 36

Condition: used, Year of construction: 1981, Barnaul 1000t press in perfect working condition. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Bedpfx Agjx Da Aqe Nscw Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, stroke length: 400 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Bcedpfx Ajv Hqnaeg New Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: ready for operation (used), Press force: 10000kN, ram stroke: 350mm, stroke rate: 28rpm, overtravel: 102mm, overtravel time: 0.2s, safety distance: 330mm. On-site inspection is possible. Bcsdpfx Ajwm Nndeg Nsw

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] Bcodpfjuhb Twex Ag Njw EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo