Welding Robot

Cloos Romat 320

Condition: ready for operation (used), Year of construction: 2009, number of axes: 8, Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details. - Load Capacity: 15 kg- Own Weight: 205 kg- Controller Unit Model: ROTROL® II- Interface / Input System: Integrated control cabinet panel with compact teach pendant (handheld programmer), full physical QWERTY keyboard drawer, and display unit.- Component/Workpiece Positioner: Integrated 2-axis Cloos workpiece positioner with vertical rotary turntable plate mounted on an L-shaped tilt axis.- Cell Enclosure: Full safety perimeter booth with blue/orange panel walls, integrated sliding or swing doors, and optical safety light curtains on the loading station perimeter.- Manual Operating Panel: Dual pendant remote control box with emergency stop and multi-button configuration for station control. Pjdpfxszg H E Ds Ai Hogr

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, number of axes: 6, This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information. Pgodpfsx D R Auex Ai Hor • Tool turret: 12 positions

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Podpfxey Emz Sj Ai Hsgr

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm Pgsdpjvc Ax Njfx Ai Her clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Pgedpfx Ajwulzvsi Hjr Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm Pgodpfstwy Dijx Ai Hjr movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, Pjdpfx Aoizwv Nei Hjgr 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. A second station with another identical tilting and rotating table is possible.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Podpfoyyxlfsx Ai Hsgr Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, Maximum height 330 mm Pgjdpfx Aisx Sx Hte Hjr Distance between centers 2000 mm Working range: Maximum turning diameter over the bed cover 650 mm Maximum turning diameter over the bed slide 360 mm Main spindle: Spindle diameter in the front bearing 140 mm Spindle bore 107 mm Main drive 58.5 kW 2-stage speed range 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis 10/10 m/min Drum turret: Number of tool positions 12 Of which, driven tool positions 6 Cylindrical shank holder VDI 50 mm Dimensions / Weight: Footprint L x W x H approx. 6400 x 2150 x 2000 mm Weight 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools in the turret, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servo controller power module for 2 axes, 1 power module Simodrive, 1 feed-in/feed-out module, 1 control module for 1 axis, 1 control module for 2 axes, inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: EUR 17,000.00 net Important NOTE: In this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year of manufacture 1995), the C-axis positioning does not function. Otherwise, the machine is in perfect condition. Demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t Pjdpjwwl I Iefx Ai Hogr dimensions of the machine ca. 0 m The guides have been outdated 10 years ago