Used Welding Robot for sale (7,688)

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Rjdpfxoy Efmgo Airjch This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Redpfxorl S Ufe Airjch Year of construction: 2000

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Control and operator unit PHG 10-2 Rcedpfx Aiewra S Dsreh The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Rcedpfxo Aaw U Tj Airoh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: R08175632, empty load weight: 135 kg, 1. Robot for welding "FANUC" – Arc Mate 1001C/6L Redpfxet N Rmko Airsch Type: A05B-122.1-B301 No.: R08175632 Date: 2008 Weight: 135 kg 2. Rotary positioner "FANUC 2-axis Servo Positioner" Type: A05B-1220-J201 No.: R07255039 Date: 2007 Weigh: 295 kg 3. Welding device "CEBORA , with a welding control panel for connecting to the "Arc-On" robot Type: MIG 5040/T D PULSE No.: D32264 Operating voltage: 400V, 50/60Hz, 36A Max. el. power: 500A-40%; 450A-60%; 430A-100%

Condition: used, Year of construction: 2001, operating hours: 12,790 h, Easy-to-use welding cell equipped with an ABB IRB140 robot and an S4C+ M2000 control system, as well as Fronius TPS welding equipment. Rcodpfx Aijz Apzyereh A convenient solution for smaller welding projects, with a design that makes it easy to position and move as needed. Only a pallet truck is required to move it. The cell has primarily been used for trial welding and demonstrations. Specifications: - ABB IRB140 - ABB S4C+ M2000 control system - Fronius TPS welding equipment - Compact design - Suitable for smaller welding projects - Used for trial welding and demonstrations - Easily moved with a pallet truck

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. Rcedpfx Aij Ad R Eaorsh The system can be inspected and tested upon request. The robot was operated in a single-shift operation and has few operating hours!

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Redpfx Aisrfucqsrech Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request Rcsdpfohzhynjx Airjh All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Arc sensor / Tactile sensor Rsdjzty D Hjpfx Airech Automatic torch cleaning 2-station operation Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. Rsdpfx Aiox Exl Njrjch The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: like new (used), Year of construction: 2022, Equipment: documentation/manual, Welding Robot - Set with welder and 3-axis positioner: 1. Welding robot by KUKA model CYBERTECH - KR 8 R-2100-2 KRC4 prod. 2022 - Manipulator type KR8 R2100-2 - Maximum reach - 2100 mm - Payload max. - 20 kg - Positioning repeatability +/- 0.05 mm - Control KRC4 - System Software - KUKA System KSS 8.6 - System Sofware - PROFINET, Safe.Operation, - Welding Proces Software - KUKA.ARC.Tech 2. Positioner 3-axis KUKA KP3-V2H max. 1000kg / side L - 2000 mm - distance between plates D - 1600 mm - max. diametr of fixture 3. FRONIUS welding machine type TPS 500i ( option: TPS 500i CMT ) Welding Packaging - PMC (Pulse Multi Control) Welding Packaging - Standard Rcodpfxjllyfis Airoh Welding Packaging - Puls

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Rcedpoyzn D Hsfx Airjh Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Max load - 1000 kg

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Rcedoy Emz Sopfx Airjh

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Rcjdpfx Ajxw R Nnsireh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 330 kg, load capacity: 6 kg, arm reach: 1,373 mm, controller manufacturer: Fanuc, controller model: R-J3IB Mate, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.08 mm, industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 Rcodpfx Aieyf Ha Tersh year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. Rsdpszkanaofx Airech If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A05B-2651-B011, arm reach: 911 mm, type of input current: DC, total height: 600 mm, load capacity: 7 kg, FANUC LR Mate 200iD/7L A05B-1142-B301 + R-30iB Mate A05B-2651-B011 | 2017 | complete set FANUC LR Mate 200iD/7L ➤ Catalogue number: A05B-1142-B301 FANUC R-30iB Mate Controller ➤ Catalogue number: A05B-2651-B011 The package also includes the operator panel (teach pendant) and all cabling! The robot is in very good technical condition, dismantled from a working installation, ready for immediate operation. 🔧 Key robot specifications: ✔ Model: LR Mate 200iD/7L ✔ Manufacturer: FANUC ✔ Year of manufacture: 2017 ✔ Number of axes: 6 ✔ Reach: approx. 911 mm ✔ Payload: 7 kg ✔ Repeatability: ±0.02 mm ✔ Robot weight: approx. 27 kg 🔧 Controller: ✔ Model: R-30iB Mate ✔ Catalogue number: A05B-2651-B011 Rcodpfoywlgqox Airsh ✔ Power supply: 200–230V Condition: ✔ Visual: very good ✔ Technical: fully functional, ready for operation ✔ Dismantled from a functioning installation 🛠 Service / Maintenance ✔ Last maintenance: May 2025 ✔ Regularly serviced ✔ Ready to work without the need for immediate servicing Applications ✔ Pick & Place ✔ CNC machine tending ✔ Production automation ✔ Packaging ✔ Assembly Additional information ✔ Shipping within the EU possible ✔ VAT and EU invoice available

Condition: used, ABB 2-Station Welding Robot Cell You are bidding on a professional, fully functional 2-station robot welding cell for continuous industrial use. Rsdeztkb Njpfx Airech This system is ideal for automated and highly efficient MIG/MAG welding of small to large series (e.g., in the automotive or machine construction industry). Thanks to the clever two-station principle (shuttle table/parallel stations), the operator can safely load new parts or remove finished workpieces on one side while the robot productively welds on the other side. System Components: 1. Industrial Robot & Controller (ABB): - Robot controller: Reliable and robust ABB S4 / S4C generation - Programming hand-held device: Original ABB Teach Pendant with joystick for precise teaching of welding paths. - Additional axes: Both stations have synchronized, motorized rotary axes (nameplate: ABB / ELMO, type: PS 60/4-50-P-LSS-3985) for optimal positioning of the workpiece in the immersion process. 2. Welding Technology (Carl Cloos Welding Technology GmbH): - Welding power source: Cloos GLC 503 QUINTO (Powerful 500A MIG/MAG system) - Cooling: Integrated liquid cooling (water cooling) for maximum duty cycle of the welding torch. - Accessories: 2x professional WDI ECORACK large container wire spools on rolling frames, including robust wire guide hoses to the robot. 3. System Control & Safety: - Control unit (HMI): Modernized Siemens SIMATIC HMI touch panel for easy control of the entire system, piece count control, and error analysis. - Safety: Complete, enclosed protective cabin (transparent walls for protection against UV radiation and welding spatter) including an integrated extraction system (hose package on the robot arm). - Inspection: The system was in industrial use until recently (including certification for well-known automotive suppliers) and has a valid DGUV-V3 inspection sticker. "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2005, functionality: fully functional, ABB WELDING BOOTH WITH ROBOTS 1. GENERAL - Manufacturer: ABB - Type: FlexArc LX2 - Dimensions: 4.6 x2.6x 2.6 m - Weight: 5200 kg - Year of construction: 2005 - Previous use: training station 2 CONSTRUCTION - Supporting frame - Metal walls - Roof with extraction spigot for connection to external ventilation - Service door with window equipped with electric security bolt - Albany Rapid Protect 320 roller door with inverter - SICK horizontal safety curtain in the loading/unloading area of the turntable - Siemens S7-300 controller - Siemens TP 170B color/5.7" touchscreen control panel - horizontal-axis swivel for mounting an instrument / tool with horizontal axis type IRBP 250 L with a load capacity of 250 kg 3. ROBOTS - Robots 2 pcs. - 1 piece welding robot - 1 piece robotic (after retrofitting can be used as welding robot) - Type: IRB 1400 - Version: M2004 - Year of construction: 2005 - Serial No.: IRB1: 14-50257 IRB2: 14-50258 - Control: IRC 5 - Number of hours worked: approx.2000 - Automatic TCP measurement 4. WELDING EQUIPMENT - welding current source: MIGROB 500 (ABB) - 1 pc. Rjdpfx Aievbg Ufsrech - spare welding current source: LRC 430 (ESAB) - 1 pc. - wire feeder: WIRE FEED UNIT A34E - PIB ( ABB) - 1 pc. - cooler: OCE 2H (ESAB) - welding torch cleaning device TC96 - 1 pc. - welding wire cutting device - 1 pc.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Kawasaki RA006L Robot with E-Controller Rcsdpfx Aijympvtorjh Year of manufacture: 2022 Control unit: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consists of: • Robot kinematics • Controller (10 m cable to robot kinematics) • Teach pendant (10 m cable to controller) Interfaces: • RS232 • 2x Ethernet (individually configurable) • 2x USB • 32 digital inputs / 32 digital outputs (freely assignable) • User interface on robot upper arm R-Series 12E / 8A / 2x air (10 mm) (The signals from the user interface are available in addition to the 32 inputs and 32 outputs.)

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, The machine is not in use anymore and therefore its for sale. It has 20h of welding and it has been 596h turned on. It is as new, as can be seen on pictures. Location of the machine is in KFK, Croatia and here it can be seen. For more information and price contact us. Redpfjwwt S Uex Airoch

Condition: excellent (used), Year of construction: 2011, Manufacturer: WSM Type: Robotic welding cell Year of manufacture: 01/2011 Serial number: 11004 Industrial robot: FANUC LR Mate 200iC Number of work cells: 2 Welding device: FRONIUS RCU5000i Wire feeder: FRONIUS VR7000CNC, external Supply voltage: 400 V Connected power: 10 kVA Rsdpo Agvlhofx Airjch

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa/Motoman Year of manufacture: 2013 With 2 robots (load capacity: 1 x 165 kg, 1 x 50 kg) Each with 1 x WIG AC and DC welding system from EWM, 1 x spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel or aluminum Technical specifications Robotic welding system – Specifications / Equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - Control system S7 for fixture Double welding cell with 2 maintenance doors and 2 loading stations - Opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - Extended design 2 x bases 1 x control unit with operator panel DX - Master - Slave 1 x floor-mounted chassis with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot control unit Media feedthrough for compressed air and electrical signals in the positioner Rjdpfx Asz Aac Usirsch Design and manufacture of a base frame for part support Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Article no.: 520000050019 For automated and robotic applications Inverter DC welding unit Standard interfaces for automation (Start/Stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: Remote control, optional interfaces for automation, documentation and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Power supply 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Article no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roller drive Connection for water cooling Control with digital incremental encoder Push-pull capable Separate button for wire retraction, gas test and wire threading Parameter setting and storage centrally via welding system control unit Wire speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Alternating neck technology Push-pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and manufacture of a part support for aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robot, consisting of - Medium frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water chiller Design and engineering Documentation such as machine design and parts lists in a simple form in German CE declaration Welding fume extraction system with piping

Condition: like new (used), Year of construction: 2017, A complete welding system based on the KUKA KR 16 L8 arc industrial robot with KRC4 controller and Fronius CMT welding system. The system includes a KUKA KP1 positioner and a wire feeder with cooling. Rcodpfx Aey Hktnjirjh All main components are from 2017. The kit includes a cleaning device and a laser device for automatic torch geometry correction (Rotolab), as well as a Siemens safety PLC. Technical data: Industrial robot: Model: KUKA KR 16 L8 arc HW, Serial No.: 867099, Year of manufacture: 06/2017, Number of axes: 6, Payload: 8 kg, Reach: 2015 mm, Weight: 240 kg Positioner/Rotator: Model: KUKA KP1-HC1000R980, Maximum payload up to 1 t, Serial No.: 152228, Year of manufacture: 06/2017, Weight: 850 kg FRONIUS welding machine: Type: TransPuls Synergic 400 CMT R, Serial No.: 28245623, Output: 400 A, with cooling unit Model: Fronius FK 4000-R FC, Serial No.: 28245627, Power supply: 400 V, Frequency: 50–60 Hz, Current: 0.6 A, Maximum pressure: 4 bar (0.4 MPa), Power: 2 kW, Protection class: IP23 Wire feeder: Model: Fronius VR 7000-CMT 4R/G/W/F++, Serial number: 28245629, Voltage U11: 55 V / 4 A, Voltage U12: 24 V / 2 A, Wire feed speed: 0.5 – 22 m/min, Welding current: – 400 A (100%), Protection class: IP23