Completely overhauled Hot Radial Forging
CNC GFM SX-16

Name: CNC GFM SX-16
Brand: CNC GFM
Availability: InStock

Year of construction

1974

Condition

Used

Location

Italy

Completely overhauled Hot Radial Forging CNC GFM SX-16

Show map

Machine data

Machine type:: Completely overhauled Hot Radial Forging

Manufacturer:: CNC GFM

Model:: SX-16

Machine number:: 1293

Year of construction:: 1974

Condition:: refurbished (used)

Functionality:: fully functional

Price & Location

Location:: Italy

Call

Details about the offer

Listing ID:: A14677021

Update:: 18.06.2025

Description

CNC Radial Forging Machine GFM mod. SX-16

Manufacture: GFM (Austria)
YOM: 1974 / 2022
Model: SXL-16
Machine number: 1293
PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM
Numbers of Hammers: 4
Forging force: 800 Ton (200 t per Hammer)
Strokes per minute: 580
Hammer length: 320 mm
Maximum hammer setting scope
- calculated by diameter: 100 mm
Maximum diameter of forging regarding:
- structural steel: circular cross section – Ø 160 mm
square cross section – 130 mm
- high alloy steel: circular cross section – Ø 120 mm
Gtodpjq U Sa Sefx Ah Hot
square cross section – 100 mm
Extreme quadrangle: 12 x 120 mm
Maximum length of forging: 6000 mm
Min and Max diameter
of mounting in manipulator: 30 - 160 mm
Feed of manipulator A: 6800 mm
Feed of manipulator B: 7200 mm
Passage through manipulator: Ø 130 mm
Manipulators speed in fast move: 400 mm/s
Feed speed of manipulators
(stepless adjustment): 10 ÷ 115 mm/s
Cooling water pressure: 3 ÷ 5 bar
Temperature of inlet water: max. 30˚C
Cooling water consumption: 34m3/h
Pipe diameter for cooling water: 2”
Compressed air pressure: min. 5 bar
Pipe diameter for compressed air: Ø20 mm
Consumption of compressed air: 1,5 Nm3/h
Power supply (nominal power): 350 kW
Motor voltage: 500 V
Control voltage 220 V
Power of main engine: 200 kW
Power of pump motors: 185 kW
Power of manipulators motors: 2 x 22 kW

Dimensions of the machine

Axis height of forging above the hall level: 750 mm
Maximum height of machine above the hall level: 2.050 mm
Maximum length of machine on the hall level: 33.740 mm
Foundation length: 34.200 mm
Maximum width of machine on hall level without
loading equipment: 4350mm
Foundation width: 15.600mm
Machine net weight: 124.490 kg

Documents

14677021-01.pdf

Seller

Registered since: 2024

3 listings online

Call

Send inquiry

Telephone & Fax

+48 669 0... show

These listings may also fit your interest.

Listing

Hradec Králové

6,374 km

Anhydro Spray Dryer
AnhydroPSD 52

Call

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Gjdpfx Ahjuk Ehxj Hstt

See details

Listing

Borrby

6,562 km

Profile bending machine
RoundoRS 5 CNC

Call

Listing

Band saw machine JAESPA W 400 AZ/P-Minipos

Iserlohn

6,958 km

Band saw machine
JAESPAW 400 AZ/P-Minipos

€4,250

ONO plus VAT

Call

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Gjdpfx Ahjgf H Sae Hstt Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

See details

Listing

CNC gear grinding machine with dresser Reishauer RZ 362A

Düsseldorf

7,016 km

CNC gear grinding machine with dresser
ReishauerRZ 362A

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm Gjdpfx Ahsxb Ufue Hott For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator

See details

Listing

Decazeville

7,393 km

MACHINING CENTER
QuaserMV204CPL

€35,000

fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 37 kVA, torque: 236 Nm, controller manufacturer: Heidenhain iTNC530, controller model: iTNC530, table width: 700 mm, table length: 1,700 mm, table load: 700 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,580 h, spindle motor power: 37 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm SK40 tool holder Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Spindle center coolant 20 bar Chip conveyor Crank Gtedpfjvz Tyuex Ah Hst

See details

Listing

Bursa

5,183 km

Gear grinding machine
REİSHAUERRZ701

Listing

Turning Automatic Lathe - Longitudinal TSUGAMI HS 2075AX

Germany

6,891 km

Turning Automatic Lathe - Longitudinal
TSUGAMIHS 2075AX

Call

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Godpfovivx Njx Ah Hjtt Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

See details

Listing

Stamping- and forming machine BIHLER GRM 80

Grebenau

6,826 km

Stamping- and forming machine
BIHLERGRM 80

Call

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: Gtjdor D N Eqspfx Ah Hot 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

See details

Listing

Shildon

7,566 km

Cnc lathe
YangML-300

Call

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Gsdpfxerfx Tne Ah Hstt Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

See details

Listing

Horizontal internal broaching machine Karl Klink RIW 6,3

Hövelhof

6,884 km

Horizontal internal broaching machine
Karl KlinkRIW 6,3

Call

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Gtedjiw Dlkjpfx Ah Hst Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

See details

Advertise here