Lathe - cycle-controlled

Colchester Combi K4

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Dedpfxexd D Rfj Ag Rokg Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: used, Year of construction: 2002, functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 520 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 3,150 mm, Turning diameter 520 mm Turning length 3000 mm Control SIN 840 D Siemens Z-axis 3150 mm Feed Z-axis 1 - 40,000 mm/min Rapid traverse Z-axis 40.00 m/min X-axis 600 mm Feed X-axis 1 - 30,000 mm/min Rapid traverse X-axis 30.00 m/min Main spindle S1 Spindle speed range 1 - 3,300 rpm Drive power at 100% load 29.00 kW Djdpfx Aoxadk Dsg Rjkg Spindle nose DIN 55026 - Size A11 Spindle diameter at front bearing 160 mm Spindle bore 115 mm C-axis 360 x 0.001° Milling spindle S2 Tool holder Capto C6 Infinitely variable speed range 1 - 6,000 rpm Y-axis -100 / +150 mm B-axis -110 / +110° Tool magazine with 100 positions Total power requirement 145 kW Weight of the machine approx. 24 t

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Dodpfxoxm Sm Hj Ag Rskg Toolpost

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX Djdpfx Agew Iy T Ss Rskg 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Dkodpfjvtw Imjx Ag Rog Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Fanuc OiTC Control C Axis & Driven Tools Serial Number LC223806086 Year 2010 /10

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg Dkedpswwl Izefx Ag Rjg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or * Dedpfon H Nzusx Ag Rokg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Turning length: 3,000 mm Swing diameter over cross slide: 520 mm X-axis travel: 600 mm Y-axis travel: 150 mm Z-axis travel: 3,150 mm Swing diameter: 520 mm Turning length: 3,000 mm Control: SIN 840 D Siemens Z-axis: 3,150 mm Z-axis feed rate: 1 – 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min X-axis: 600 mm X-axis feed rate: 1 – 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Main spindle S1 Spindle speed range: 1 – 3,300 rpm Drive power at 100% load: 29.00 kW Spindle nose DIN 55026 – size A11 Spindle diameter at front bearing: 160 mm Spindle bore: 115 mm C-axis: 360 x 0.001° Milling spindle S2 Tool holder: Capto C6 Infinitely variable speed range: 1 – 6,000 rpm Y-axis: -100 / +150 mm B-axis: -110 / +110° Tool magazine with 100 stations Dsdoxpfd Depfx Ag Rskg Total power requirement: 145 kW Machine weight approx.: 24 t

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: Dsdpfx Agsxp Hmas Rekg - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: like new (used), Year of construction: 2017, operating hours: 59 h, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, feed length X-axis: 510 mm, feed length Z-axis: 220 mm, feed rate X-axis: 20 m/min, grinding wheel diameter: 205 mm, distance table to spindle center: 357 mm, table load: 120 kg, type of input current: three-phase, grinding wheel width: 16 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,100 kg, grinding spindle motor power: 2,200 W, grinding wheel speed: 3,600 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 Colour touchscreen: Yes Maximum grinding lenght x width: 400 x 200 [mm] Stroke X axis (table movement): 510 [mm] Min. Stroke speed X axis: 100 [mm/min] Max. Stroke speed X axis: 20000 [mm/min] Z axis travel (transverse movement): 220 [mm] Min. distance spindle nose / table: 22.5 [mm] Max. distance spindle nose / table: 357.5 [mm] Max. load on table: 120 [Kg] Grinding wheel min. speed: 1000 [rpm] Grinding wheel max. speed: 3600 [rpm] Grinding spindle motor power: 2.2 [kW] Max. diameter grinding wheel: 205 [mm] Max. grinding wheel width: 16 [mm] Min. grinding wheel width: 6 [mm] Grinding wheel bore: 31.75 [mm] Number of running hours: 59 [h] Supply voltage: 400 [V] Total power required: 11 [kVA] Weight : 2100 [Kg] INCLUDED EQUIPMENT: x1 150 [L] coolant tank FB1/R with papertape filtration unit FB1 x1 BRAILLON electro-permanent magnetic chuck type EPEFINE 2 x1 BRAILLON magnetic chuck remote control, microprocessor-based, type T10 x5 grinding wheel flanges x1 oil chiller x1 transformer x2 service keys x1 balancing shaft x1 set of axis-brackets for transport STANDARD CONVERSATIONAL PROGRAMMING MODE: Straight and angular dressing (standard) Surface grinding, multiple plunge grinding, and face grinding (standard) INCLUDED ISO PROFILING: Wheel profiling Contour machining of workpiece Full functionality for V-shape and freeform programming on the grinding wheel, and ISO contouring on the workpiece. Precise positioning integrated: +/- 1 [μm] Dedpjw Hf Hiofx Ag Rjkg Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to brands like Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinder, lathe, machining center, milling machine.