Used Harrison M 250 for sale (29)

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Podpsx Rrpfjfx Afhepl Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks Ppodpfxox Utc Is Afhel 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: good (used), Technical details Turning diameter over bed: Pjdpfjq Ixqgsx Afhepl 280 mm Turning diameter over support: 170 mm Turning length: 680 Rotational speed: 40 - 1500 / 9 step rpm Spindle bore: 35 mm Top slide adjustment: 150 mm Tailstock holder MK: 3 Tailstock quill stroke: 95 mm Total power requirement: 0.9 kW Machine weight approx: 410 kg Transport dimensions LxWxH: 1.6x0.8x1.4 m

Condition: used, Harrison M250 Centre lathe, 3 jaw chuck 200mm, approx 20 inch between centres. Pedpfxsx Rqffe Afhopl

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. Ppodpfxewfiaqe Afhel 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: excellent (used), For sale: metal lathe from the English manufacturer Harrison, model m300, as shown in the photos. The machine is in very good condition. It is equipped with a new 160 mm chuck from Fuerda. Sino brand optical scales have been installed. During test turning over 20 cm, a diameter variation of 0.04 mm was measured. Price is non-negotiable. Net price +23% VAT. Pedjx Ur Amepfx Afhspl Chuck: 160 mm Turning length: 600 mm Swing over cross slide: 220 mm Swing over bed: 320 mm Tailstock taper: MK3 Spindle bore: 38 mm

Condition: ready for operation (used), functionality: fully functional, center height: 165 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, total height: 1,300 mm, total length: 1,500 mm, total width: 800 mm, Harrison M300 3-phase 380V motor operates perfectly! Geared headstock with 12 spindle speeds. Spindle RPM adjustable from 40 up to 2500. Foot brake pedal. Norton gearbox for easy thread cutting. Thread cutting dial. Power feed in both longitudinal and cross directions. Metric lathe. Camlock D1-4 spindle with MT5 internal taper. MT3 tailstock quill. Splash guard. E-stop button. Coolant pump. Made in the UK! Distance between centers: 650mm Center height: 165mm Spindle bore: 40mm Ppodpfxjx Hkqgs Afhel Overall dimensions: 150x80x130cm Contact us for shipping options! € 3,750.00

Year of construction: 1963, condition: repair required (used), LZ lathe Fabr.Harrison Type:L 12 Bj.1963 Machine has clutch defect. Pedpjibdz Iofx Afhepl Chuck Dm.160 mm Tool holder Multifix B turning diameter : 213 mm Center length : 610 mm spindle bore : 32 mm spindle speeds : 34-2000rpm Machine documentation available.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Psdpjh Hvk Ajfx Afhspl Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Year of construction: 1998, total length: 2,600 mm, total width: 1,500 mm, total height: 2,100 mm, Empty weight: 1.500 kg - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: P30162 - Drive system: Teach-in - Power [kW]: 7.5 - Centre height [mm]: 200 - Swing over bed [mm]: 400 - Carriage turning diameter [mm]: 245 - Distance between centres [mm]: 1250 - Bed width [mm]: 320 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Removable bed - Swing over removable bed [mm]: 585 - Transport dimensions: 2600mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Psdpfx Afjx Ad Uzshjpl

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Ppedpfjxcuuljx Afhel Errors and prior sale reserved.

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm 42 mm 3 MK 110 mm 2,2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Pedpfewiqv Iox Afhopl Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity

Condition: excellent (used), Year of construction: 2019, Model: Alpha 1460 XS Year: 2019 Swing Over Bed: 460mm Swing Over Cross Slide: 270mm Swing In Gap: 730mm Distance Between Centres: 1500mm Spindle Speeds: To 2200 RPM (Variable) Spindle Bore: 78mm Machine With: Psdpfsxphv Nox Afhjpl 300mm 3 Jaw Chuck 8 Station Indexing Turret (VDI 30) Various Tooling

Condition: excellent (used), Year of construction: 2019, 460mm swing over bed, 270mm swing over cross slide, 1500mm Distance between Centres, 2200rpm spindle, 77mm Spindle Bore, Podpfx Afjw Naxqjhepl 11kW spindle motor, FANUC OI-TD CNC control, Tailstock, 300mm 3 jaw chuck, coolant, 8 station turret, coolant

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Psdpfox D Uf Tsx Afhopl Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Psdpfernkhyox Afhopl Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Tool size: Standard: 20 x 20 mm Ppjdsrnkdyjpfx Afhsl Boring bar: 32 mm No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, Year of construction: 2025, 0350 mm 0650 mm 175 mm 42 mm 315 mm 3500 U/min D1-4 DIN 55029 Psdpfx Afowp Tqhehepl 63 mm 140 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, Year of manufacture: 2000 Turning length: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Distance between centres: 1000 mm Control type: FANUC Spindle nose: Camlock D1-4 Spindle bore: 40 mm Max. spindle speed: 3,500 rpm Podpfxjxd Aige Afhjpl Spindle motor power: 7.5 kW Dimensions (L x W x H): 2100.0 × 1200.0 × 1600.0 mm Weight: 1200 kg

Condition: excellent (used), Harrison V390 Vari Speed Gap Bed Lathe (2004) Model V390 Year 2004 Condition Used Swing Over Bed 400mm Distance Between Centres 1250mm Swing Over Cross Slide 246mm Height of Centres 195mm Bed Length between Centres 1250mm Swing over Bed 400mm Psdpfx Aexwkwxofhjpl Swing in Gap 585mm Swing over Cross Slide 246mm Spindle Bore 54mm Morse Taper in Nose Bush No. 4 MT

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm 80 mm 315 mm 2700 U/min D1-8 DIN 55029 73 mm Pedpfswp Tnysx Afhspl 140 mm

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm 104 mm 400 mm 2000 U/min D1-11 DIN 55029 Ppjdpfxewp Tgcj Afhsl 95 mm 145 mm

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm 55 mm 315 mm 2700 U/min Podpswp Tckofx Afhopl D1-6 DIN 55029 73 mm 140 mm

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Podpfsua E Txsx Afhjpl

Condition: ready for operation (used), Year of construction: 2008, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter: 350 mm, Harrison V350 Lathe Psdexc H D Espfx Afhjpl Year of manufacture: 2008 Variable spindle speed across three speed ranges, from 20 to 3250 rpm. Digital readout on two axes by Acu-rite. Longitudinal and cross feed. Swing over bed: 350 mm Swing over cross slide: 196 mm Swing in gap: 535 mm Chuck mount: Camlock D1-4 Spindle bore: 42 mm Tailstock taper: MK4 Equipped with Multifix B quick-change toolpost and coolant system.