Wide belt sander

Costa

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Iedpfx Ajgmbu Ieb Iea Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt Iedpfx Abob Auu Rj Isa 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), compressed air connection: 6 bar, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 630 mm, Well-maintained wide belt sander available 2 rollers for pre-sanding and fine sanding 2 feed speeds Electrically adjustable height with digital readout Sanding width: 630 mm 2 extraction ports Ijdpfx Asuh Sccsb Iea Assistance with loading can be provided.

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Iodpfxsvx Afno Ab Ioa

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Iedpfx Abspugwij Isa The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. Ijdpfxsv Hxrgo Ab Iea - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: as good as new (ex-display), Year of construction: 2012, machine/vehicle number: 925625, Kuka unused stock item KUKA VKR210 R2700 Year of construction : 03/2012 load capacity 210 kg reach 2700mm Ijdpfxjrdh T Ds Ab Isa weight 1412 kg Serial number :: 925625 With connection cable: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203Kg Year of manufacture: 12/2012 Teach panel 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140 ° / -5 ° Axis 3: -120 ° / 155 ° Axis 4: ± 350 ° Axis 5: ± 122.5 ° Axis 6: ± 350 ° Movement speed of the robot in º / s Axis 1: 105 ° / s Axis 2: 107 ° / s Axis 3: 114 ° / s Axis 4: 136 ° / s Axis 5: 129 ° / s Axis 6: 206 ° / s

Year of construction: 2001, condition: excellent (used), I sell bottom grinder Costa A1 ACT 1150, year 2001. Cylinder configuration with soft electronic segmented pad. Working width 1150mm. Belts 1180x2620mm Press rollers for short work pieces. Fan for vacuum.included. Air blower for both units. Total weight 2500 kg. 2 motors 7,5 kW and 15 kW total power 27 kW Ijdpfx Asgq U R Nsb Ija Very good condition, serviced machine. Available immediately.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Iodpfx Abjwmxh Tj Isa

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Isdpfx Asw U A Dmjb Ioa Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.