4100×16 mm - 4 collective hydraulic cylinders

CRONOSSTECH SHSB 4R 40-380

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Klodpsuddcaefx Abcjp Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Klodpfxox Dtt As Abcop Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Kedpfxowpku Do Abcjlp Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 4159, Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Kljdpswqld Nofx Abcsp Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Kjdpfjx Dd Hyox Abcjlp Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system Kodjw Sl T Sepfx Abcolp * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Workbench with sheet steel shelf and 10-year manufacturer's guarantee* Made in Germany - Beech multiplex board 750 x 700 x 40 mm, without back board - Base frame made of VK tube 40/40/2 mm - Sheet steel shelf 600 mm deep - Leg elements with plastic adjustment plugs - Surface load with evenly distributed load: 1000 kg - Standard workbench - 750 x 700 x 840 mm L x D x H - Ergo version - 750 x 700 x 900 mm L x D x H Available in 7 different basket colors: Klodpfx Aboubxxqjcsp - Anthracite gray - Gentian blue - Fire red - Sky blue - Light blue - Light gray - Pure orange - Reseda green - Signal blue - Deep black * 10-year manufacturer's warranty. Wearing part excluded. This item is delivered free kerbside. Delivery time usually 5 working days. Free shipping within DE without islands.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Maximum tube length: Kljdow I In Rspfx Abcsp

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel Kjdpfx Ajxabflsbcelp - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT Kledpfjxw Ecvjx Abcop * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg