0,5euro/kg Radial drilling machine

Csepel rfm51

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min Dsdpfexb Ed Uox Addjla tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Dledpfswb Dq Nox Addea

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module Dsdpfx Ajt Hwxzoddola total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm Dlodpfx Asizlh Hjddja spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Dljdpfx Adev Dkykjdja

Condition: good (used), Cast iron bed - Floor Plate Dljdpfjh Auahjx Addsa Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, A used, overhauled Niles ZSTZ 630 C3P. Max. gear diameter: 630 mm Dledpfx Adexaptkjdsa Gear width: 215 mm Max. module: 12 Min. module: 1 Stroke length: 225 mm Table diameter: 500 mm

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Dsdpfowzh Eqex Addjla Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix Dsdpfovwgm Hox Addsla - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Dlsdpfev I D Shjx Addoa Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table