Hydraulic guillotine shear

DARLEY AP 150 3100

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Hjdszi Ra Ropfx Ah Uofn Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm Hfjdpfxsxab Erj Ah Ujn oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer: Meuser Type: M 70 R Year of manufacture: 1970 Condition: very good, fully functional Technical data: Hfsdjlp Iqmepfx Ah Ujn Overhang: 1800 mm Drill spindle mount: MK6 Drilling capacity, max.: 120 Table size: 2000 x 1100 mm Rotary table: 700 x 700 x 500 mm Weight: 8000 kg With support column Hydraulic and electrical diagrams are available.

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Hfsdpfx Aszka H Ajh Usn

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW Hjdpfx Aspxmxcjh Ujfn - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands. Hodpfsy Enwhjx Ah Uefn

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: Hsdpfjwvih Njx Ah Ujfn - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Year of construction: 2009, condition: used, Apple 15 head depositor Hfjdob Ucwkepfx Ah Uen Model: CCP12 Stainless cantilever framed 15 head machine

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Hjdpfjxx R A Dox Ah Uofn Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: used, Year of construction: 1992, machine/vehicle number: 1311PH1442V1188, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 320 t, table length: 6,200 mm, Colly 320/6 press brake Hfedpfx Ahey Ti Ahs Usn Price negotiable.