Milling machining centers - horizontal

DECKEL MAHO DMC 100 H duoBLOCK

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump Fjdpfxsxylqxs Ag Roft - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 Fjdpfxsvyli Es Ag Reft The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Fsdpfx Agjrt Uc Eo Rjft Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: Fsdpfow Eb Itex Ag Reft X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Ffodpfxewrfams Ag Rst

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: Ffsdpeurw Uyjfx Ag Rjt The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Ffedpswm Rqasfx Ag Rst Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Year of construction: 2007, condition: used, EFD INDUCTION BJ.2007 Ffedjwd Rvwopfx Ag Rjt

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Chairs: - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. Fsdpfoiiv Ikox Ag Roft - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Fsdpfx Asu Rnlujg Rsft Spindle hours: 26,451 Technical Data: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double gripper tool changer - Automatic swiveling milling head - Rotating viewing window - NC rotary table with pallet support - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring SK 40, mechanical version, range: 63...310 mm / +/- 3 mm - Interval control for chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar