Universal machining center

Deckel Maho DMU 80 P Hi-Dyn

Year of construction: 2005, condition: ready for operation (used), A CNC milling machine, which has been converted to a horizontal design, is available. Travel X/Y/Z: 800mm/700mm/600mm, repeat accuracy: mm. Table diameter: 630mm, max. table load: 600kg, tool positions: 60, tool holder: 60, tool diameter: 100mm/160mm, tool length: 350mm, max. tool weight: 10kg, feed rate: 50m/min, rapid traverse: 50m/min. Machine dimensions X/Y/Z: approx. 6600mm/5400mm/2750mm, weight: approx. 10200kg, control: iTNC 530. Documentation available. On-site inspection is possible. Njdpfov Amprox Adwokt

Condition: good (used), Year of construction: 2004, operating hours: 1,09,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation Nksdpfx Aoxcp Sledwst - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Nksdpfxjx Dndcs Adwot z-travel 500 mm

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t Nkodpfx Asugawfsdwst dimensions of the machine ca. m

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm Nkjdpfxju Uu S Te Adwet spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Nksdpfxorxr Rgj Adwot

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Nkjdpfjx R R Hcsx Adwjt Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t Nkjdpsw Rrcqjfx Adwjt dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: new, number 70 Positionen Nksdpfewth N Tjx Adwst weight 90 kg condition neu 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 1x Set of Stop and Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm Nsdpfx Aswm Rqaodwekt travel -z axis 510 mm