Reels

DECOILER DIMECO

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Fjdpehrnbksfx Adaspd Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg Fpodpfx Ajhhyzcedaod coil weight : 6000 kg: Coil width 1250 mm Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Year of construction: 2010, condition: good (used), weight 3000 kg Fpodpfx Aohhiawedasd

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Fedjhx R Etspfx Adaspd Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Reel - straightening - combination strip width: 360 mm Strip thickness: 0.6 - 3.5 mm Cross-section: 900 m² at 400 N/mm² Fodpotq Sgnjfx Adajpd - Straightening rollers: 7 - Single roller infeed - Infinitely variable speed control via frequency converter - 2 pneum. draw rollers Reel: - Coil weight: 2000 kg - manual spreading - pneum. pressure arm - common base frame

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm Fpsdpfx Aevut Thodaed

Condition: used, sheet width 320 mm coil weight 1,5 t coil outside dia. 1250 mm Fpjdeqkwvijpfx Adaod diameter of the mandrel 370/430 mm Mandrel height 1000

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop Fpodpsv Tzphsfx Adaed - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fpedpfsxyhhajx Adajd Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, Coiltech strip line consisting of: servo feeder, straightening machine, decoiler. Strip width: 100-800 mm. Strip thickness: up to 5.5 mm. Fjdpfoxfcdgox Adaspd