Bale press

Dixi 80 SLD

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Itedoyt Hl Sepfx Abcjd Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. This offer is subject to prior sale and change without notice. Inspection is possible by arrangement. Sale is ex works, advance payment, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Itodpfx Aox A U Ncebcjd Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Just arrived Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Itodpfxeygk Hgo Abcjd Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale ex works, advance payment only, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Iedpfeyuxv Eox Abcstd Machine weight approx. 8,000 kg (without bale)

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Itsdpfxeyhcybj Abcod Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Itodpfx Absybaz Aocsd Year of manufacture: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. You will find the video on our website or YouTube channel. The hydraulic hoses should be renewed. Inspections with power connection are possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the information provided or for any errors. This offer is subject to change and prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is conducted on a prepayment basis, ex works, without warranty or guarantee.

Condition: used, Year of construction: 2007, Diesel + electric. Isdpfx Aoxq Tycsbcotd Batteries need to be replaced

Year of construction: 2006, condition: used, beside the press granulator Hellweg MDS 120/150 1,5 KW Year: 2006 Power: 1,5 kW Application: Feed opening: 150x150 mm No. rotor knives: 3 No. stator knives: 2 Iodpfx Ajixt Hlobcstd Rotor-Ø: 150 mm Rotor-width: 120 mm Price: € 2.750,00 contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The baler is in good, fully functional condition and has been inspected and tested by us. The video can be found on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We accept no liability for the information provided or for any possible errors. Iodpjyf Eh Aofx Abcetd This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of Manufacture: 2013 Pressing Force: 60 t Iodpfxeyba Ago Abcjtd Drive Power: 11 kW, 32 A Feed Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Viewings, including under power, are possible at any time by appointment. Upon request, we can also perform test runs with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 am to 2:00 pm. On Friday, we are available from 8:00 am to 1:00 pm. Please note: All technical data is based on the manufacturer's information. We accept no liability for any errors in the information provided. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.