Machining center

DMG MORI DMC 100 U duoBLOCK

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Gsdex D Eh Eepfx Ah Djkf Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Gsdewdub Dspfx Ah Dokf Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m Gksdpfxot Hwu As Ah Djf

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder Gksdpfoiva Dksx Ah Dof - chip conveyor Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: used, Year of construction: 2016, travel -x axis 800 mm travel -y axis 450 mm travel -z axis 510 mm Gkjdpewq S Alsfx Ah Dof control HEIDENHAIN - TNC620 table dimension (L x W) 1.000 x 450 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 4500 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 5.365h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. Gjdpfx Aowl Ag Dsh Dskf *

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Gedpfx Ahju Ed Nls Djkf Model: SWR 50 T Completely overhauled: 2008 Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: like new (used), Year of construction: 2020, Machine type Machining center - Vertical Manufacturer DMG MORI Type CMX 600 V Year of construction 2020 Control 840D SL Slimline Multi Touch Operate 4.7 Country of origin DE- Delivery time by arrangement Freight basis ex location Technical details Gkodpfx Aherwi Swo Def x-path 600 mm y-path 560 mm z-path 510 mm Control unit 840D SL Slimline Multi Touch Operate 4.7 Main spindle: Max. Max. speed 12,000 min/-1 Drive power - main spindle 13 / 9 kW Max. Torque 82 / 54 Nm Tool holder SK 40 Distance between spindle nose and table 120 - 630 mm Work table: Table clamping surface 900 x 560 mm Max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool positions 30 pos. SK 40 tool holder max. tool diameter 80 mm max. tool diameter with free neighboring box 130 mm Max. tool length 300 mm Max. tool weight 8.0 kg Tool - tool change time 2.4 sec Changing time chip - chip 6.7 sec Feed rates: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirement approx. 4.0 x 5.0 x 3.0 m Accessories documentation Chip conveyor Coolant unit High-pressure cooling 12 bar Internal coolant supply electric handwheel Signal lamp - 4 colors Measuring probe PP40 Tool measurement

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Gkedpfxeguk S Se Ah Dof Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: new, Year of construction: 2025, XX100405 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 370 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles Gkedewhrlnspfx Ah Djf - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR205249 One pairs of additional vices with independent positioning and vises modification: • Transformation of four standard vices to vices with independent positioning • Transformation of standard vices into extra clamping vices - PR205258 Pendular (2 working areas, 2 pieces) and oversides profiles machining: • Second X-FLOW • Right pneumatic fixed stop • Software to manage pendular machining • Safety devices for pendular machining • Tunnel for oversized profile machining • SW to manage oversized machining operations - PR205253 Device to measure profile length - PR205227 Device for integrity and measure of the tool - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715059 3D custom milling Module for FST CAM 4 - ZP715010 Module for rigid tapping and chase tapping - PR205268 Rear chip collection tanks for FMC 370 - PR205271 Centralised automatic lubrication system - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 (8 holders HSKF63, 8 collets and 8 HM milling cutters) - PR204497 Holder HSKF63 with cutter Ø 200 x 6mm - PR203785 Holder HSKF63 with blade Ø 200 mm