Laser cutting machine

DNE Laser - Member of Bystronic group DNE Soar plus

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Ffedpfsun Shgex Ag Rjt Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Year of construction: 2024, condition: new, Big CNC router machine for a big production. With it, you can produce doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D relief on wood. Great choice for those who seek no limits. This machine is used for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. Wattsan M1 2030’s planetary gears provide high speed, and the reinforced gantry and bed guarantee no vibrations during the work. Together, they provide precision. You can give our managers a call for additional details! Wattsan M1 2030 characteristics Ffedpfx Aeih Sdgsg Rot Working area: 2000x3000 mm Spindle: 6 kW Machine size: 2700x3540x1780 mm Weight: 860 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2014, operating hours: 33,000 h, The automatic sheet metal processing laser system comprises two each of the following: - Bystronic BySprint Fiber 3015 laser cutting machines - Bystronic Fiber 4000 laser sources - Bystronic Bytrans 3015 loading/unloading systems - Donaldson extraction units and one - Bystronic storage system Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting area: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 Watts Max. mild steel: 20 mm Fedpfxjun U Rke Ag Rsft Max. stainless steel: 15 mm Max. aluminium: 15 mm Location: Zweibrücken Professional dismantling is included in the offer. The machine was regularly serviced by a renowned company, and thanks to a ‘24-hour maintenance contract’, it received more comprehensive parts replacements than strictly required.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp Ffjdpfx Asd Ixadjg Rot The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Fsdot Tcz Uspfx Ag Rjft

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Fodpst Hw Iiofx Ag Reft total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 12,900 kg, maximum load weight: 3,800 kg, lifting height: 15,740 mm, Year of construction: 2007, operating hours: 6,100 h, machine/vehicle number: Roto 38.16, Equipment: UVV, all wheel drive, hydraulics, pallet forks, Rotating Telehandler Technical Specifications Working Height: 15.74 m Lateral Reach: 12.98 m Swivel Range: 415° Length: 6.24 m Width: 2.24 m Clearance Height: 2.85 m Load Capacity: 3,800 kg Work Platform Capacity: 300 kg Total Weight: 12,900 kg Support: Outriggers Power: Diesel Attachment: Forks Driver's License Class: 3/B Dates/Stands Ffodpfotucp Tsx Ag Rjt UVV (German Accident Prevention Regulations) until 11/2025 Operating Hours: 6,100 hours as of February 2024 Interested? Then we're happy to help you at any time. You can reach us Monday to Friday from 7:00 a.m. to 4:00 p.m.! The stated price excludes VAT. Subject to change and errors!

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! Fodpfx Ajwbil Sjg Roft With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Fjdpfx Aovw Tdlog Rjft Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Fodpouhf Tzsfx Ag Roft Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!