CNC turning and milling center

DOOSAN MX20000ST

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK Predowzmpzopfx Alwsb control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm Prodpfx Alozgw I Nowsb min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories *

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 Prodpszdf Hvsfx Alwsb - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Prsdpozqt Umofx Alwjb Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] Pjdpfxov Ig Avo Alwjrb WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Podsh Nypfspfx Alworb

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm Predpsy E I Hiofx Alwob • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Manufacturer: HERMLE Model: C 40 U dynamic Machine type: 5-axis universal CNC machining center Year of construction: 2006 Machine No.: 1XXXX Control system: SIEMENS SINUMERIK 840 D Condition: extremely good / exceptionally well-maintained CE marking: available Original HERMLE documentation: available Travel ranges X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Dynamic feed drive Rapid traverse X/Y/Z: 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Dynamic feed spindles X-axis: Ø 40 / 20 mm Y-axis: Ø 50 / 40 mm Z-axis: Ø 40 / 30 mm Main spindle Spindle speed: 18,000 rpm Tool interface: HSK A63 Internal coolant supply: 80 bar Compressed air through the spindle center Tool magazine Tool positions: 38 Tool interface: HSK A63 Automatic tool changer NC swivel rotary table Table type: SRT 800 Table diameter: Ø 800 mm Maximum table load: 1,400 kg A-axis total range: 135° A-axis: minus 110° to plus 25° C-axis: 360° 6-fold rotary through-feed Parallel T-slots: 14 H7 Measuring system / Accuracy Podpfxez E Axhs Alwjrb Direct linear measuring system X/Y/Z Resolution: 0.1 µm Input unit: 0.1 µm Display increment: 0.1 µm Position tolerance Tp X/Y/Z according to VDI/DGQ 3441: 0.008 mm RENISHAW measuring probe 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS Coolant and chip disposal system Internal coolant supply: 80 bar KNOLL high-pressure coolant system KNOLL filter system Scraper conveyor Chip flushing gun Chip cart: 200 liters Compressed air through the spindle center Oil mist extraction KNOLL KF 200/1000 Manufacturer: KNOLL Maschinenbau Type: KF 200/1000 Year of construction: 2006 KNOLL 850 K 1 Year of construction: 2006 Equipment NC swivel rotary table Ø 800 mm RENISHAW measuring probe Direct linear measuring systems X/Y/Z 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS 6-fold rotary through-feed Internal coolant supply 80 bar KNOLL coolant and filter system Scraper conveyor for chips Chip cart 200 liters Compressed air through the spindle center Chip flushing gun Oil mist extraction Manual cabinet door Manual cabinet roof Laminated safety glass panes Machine lighting German documentation Original HERMLE machine documents CE declaration of conformity NAS acceptance test in customer's plant Electrical data Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Control voltage: 24 V DC Total rated current: 63 A Total connected power: 43 kVA Connection cable cross-section: 16 mm² Minimum short-circuit strength of the power grid: 2.50 MVA IKZ electrical data Connection: 400 V / 3 PH / 50 Hz Control voltage: 24 V DC Fusing: 50 A Cable cross-section: 10 mm² Connected load: max. 16.6 kVA Dimensions / Weight Net weight according to nameplate: 10,500 kg Transport weight standard machine: approx. 10,300 kg Transport length: approx. 3,154 mm Transport width: approx. 2,354 mm Transport height standard: approx. 2,892 mm Transport height with Z motor removed: approx. 2,743 mm Transport height with Z motor and energy chain removed: approx. 2,640 mm Control cabinet cooling Manufacturer: RITTAL Type: Blue e+ SK 3185830 Year of construction / Production date: 2025 Cooling capacity: 1.60 kW Power consumption: 0.70 kW Temperature range: minus 20 to plus 60 °C Protection class internal circuit: IP55 Condition The machine is in extremely good and exceptionally well-maintained condition. Extensive original documentation and machine configuration available.

Condition: used, Year of construction: 2009, ZOLLER GmbH Model Smile 400 Machine Type Optical CNC Tool Presetter / Tool Measuring Machine PROGRAM: PILOT 3 Measuring System Optical camera measuring system CNC-controlled measuring axes Automatic tool presetting Digital tool length and diameter measurement Measuring Capacity Maximum tool length: 400 mm Maximum tool diameter: 320 mm Maximum measuring radius (X): 210 mm These are the standard specifications for the Smile 400 platform. Tool Interface Installed with: SK50 measuring adapter Compatible with other Zoller adapters (HSK/SK/BT/CAPTO depending on tooling). Control PC-controlled measuring software Industrial Windows Embedded PC Optical camera measuring system Industrial PC ZOLLER IPC Model: ZQ57 / 9G (Chassis 5G) Intel Core i3 processor Predpfxjzqdpbo Alwsb Windows Embedded 80 Plus Bronze industrial power supply LG DVD-RW drive USB ports Monitor HP EliteDisplay industrial monitor Power Supply Industrial IPC: 100–240 VAC 50–60 Hz 4–8 A Accessories Visible SK50 master gauge Multiple tool adapters Calibration/master setting tool Industrial keyboard Mouse Complete cabinet Measuring station Industrial PC Machine Configuration Granite measuring base Vertical measuring column Camera measuring system Computer workstation Optical presetting system Applications Suitable for presetting: End mills Face mills Drill tools Boring bars Shell mills ISO40 ISO50 SK40 SK50 HSK tooling (with appropriate adapter) Approximate Weight Approximately 215 kg for the measuring unit (excluding workstation and accessories).

Condition: ready for operation (used), Year of construction: 1997, operating hours: 20,045 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Equipment: documentation/manual, For sale: used Hauser S35-400 coordinate grinding machine, year of manufacture 1997, in well-maintained condition with various accessories as shown in the photos. Travel paths: X-axis: 500 mm Y-axis: 300 mm W-axis: 450 mm Z-axis feed rate, stepless: 0.5–14,000 mm/min Pedjyywb Sspfx Alwjrb Table size: 600 x 380 mm Maximum table load: 300 kg Control: GE Fanuc Series 16-M Dimensions (L/W/H): 4.25 m x 4 m x 3.25 m Total weight: 4,500 kg Machine is immediately available! Price includes loading onto truck!