CNC- milling center universal

DMG Mori DMU 50 2nd Complete

Condition: used, CNC CONTROL Controller: Hurco MAX5 Fgodsz Aqhbopfx Aa Eoi AXES Number of controlled axes: 5 Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Spindle torque Nm: 106 Spindle taper / interface: HSK63-A COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Fgodpfx Aszhlq Iea Eoi Condition: Used Year of manufacture: 2002 Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment. Fedsxcwdvspfx Aa Eogi

Condition: excellent (used), Year of construction: 2016, operating hours: 3,300 h, functionality: fully functional, Manufacturer: DMG MORI Model: ecoMill 70 Year of manufacture: 2016 Control system: Siemens Machining: 3+2 axes Internal cooling (IKZ): available Spindle hours: approx. 3,300 h Fgodpfx Aaez S Uyrj Esi X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm Machining: 3+2-axis positioning B-axis: -10° to +95° C-axis: 360° Rapid traverse X/Y/Z: 24 m/min Max. feed rate: 24,000 mm/min The machine is in very good condition.

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 480 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, swing diameter over cross slide: 300 mm, turning diameter over bed slide: 430 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with FANUC 0i-TF, 3,573 hours, like new! Includes parts collection device for removal of finished parts. Fgsdpfszkhuhex Aa Eoi • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of construction: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual operation wheel • Operating hours: 3,573 h • Power-on hours: 14,792 h (control system ON) • Machine type: Single-spindle with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two pitch circles • Number of axes: 2 (X/Z) • Condition: like new, fully functional (Inspected by EMCO technician on 09.11.2026! - Inspection report will be provided upon request) • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: More pictures and videos of the operating machine will be provided upon request. _____ Item description For sale is a high-precision CNC turning center EMCO EMCOTURN E45 from the year 2021 with low operating hours of only 3,573 hours, in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including manual wheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 gently removes finished workpieces from the working area and automatically deposits them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • High-quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel ranges: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Cross slide travel ranges (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque on the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two pitch circles • Arbor according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Fgodpfozb U Epex Aa Eji Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Mechanically overhauled. CE-conversion possible. Contact us for details! Fedpfx Aaeizi Hms Eegi

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Fgjdpfsz Ic Afox Aa Eji Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: ready for operation (used), Hello, Fjdpfx Aasiq Iy Ij Eegi we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Fgjdpfx Aaoy Nfz Ss Eei Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -50 / 950 mmDistance between columns: 2500 mm Milling head Milling head: 2 axis continuous head C5ETool clamping system: HydraulicTaper nose: ISO-50 (DIN 69871)   /   Pull stud: (DIN69872)Speed range: 4000 rpmSpindle power: 37 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10923 x 6170 x 5250 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: HR-410Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features