Welding turn table high adjustable

Dumeta D-TLP-HE-05

Condition: new, table diameter 700 mm table load 0,5 t swivelling range 0 - 135 Grad Bljdefv Azlepfx Apvok turning speeds 0,2 - 3 U/min height adjustment 400 - 900 mm boring diameter 100 mm welding current max. 500 Ampere total power requirement 0,75 kW including remote control and welding current transmission.

Condition: new, Year of construction: 2025, - Horizontal capacity: 500 kg Bedpegg Rb Tsfx Apvslk - Vertical capacity: 250 kg - Table size: 560 mm - Door on the left: 170 mm - Electrically tiltable - Foot pedal - Documentation - 230 V

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Bjdpfjirax Uex Apvelk -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust Bledpfsd Anz Rsx Apvsk

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable Bjdpfxew Hpzwe Apvelk safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Blsdpelhwr Refx Apvek Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Bsdpjl Dq U Uefx Apvelk Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Bjdpfshcnhmex Apvolk Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Bledsd Id Ugopfx Apvsk Self-centering vice Base frame

Condition: good (used), Year of construction: 1999, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,050 mm, total length: 13,000 mm, table length: 5,000 mm, table width: 3,000 mm, total width: 8,000 mm, spindle speed (min.): 12,000 rpm, total height: 6,000 mm, table load: 50,000 kg, overall weight: 1,20,000 kg, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HEYLIGENSTAEDT HEYMUNILL 3200-P heavy-duty portal-type machining center with fixed cross beam, designed for processing large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, table size approximately 5,000 x 3,000 mm, and table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A and B axes (swivel axes in the milling head) C axis (360° rotation) Simultaneous 5-axis machining possible (with fork milling head) Milling heads: Straight milling head FK 120/340 90° angular milling head WFK 100/750M Fork milling head FK 100/2D Milling head magazine: 5 positions automatic milling head changer Additional equipment: ICS approx. 7 bar 32-position tool changer (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Coolant system Bjdpfxey Anrte Apvjlk Adaptive feed control Heidenhain linear measurement systems X/Y/Z