DURMA HD-F 12020 | 15 kW

DURMA 12m x 2m Laserschneidanlage IPG 15 kW

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC Todpfxenfvx Ne Ac Nef - Service contracts, maintenance at your site

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller Tjdpfx Aeiwfp Tsc Njf - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: used, functionality: fully functional, Year of construction: 2007, Sheet width: 3200 mm Sheet thickness: 3 mm Upper beam opening: 300 mm Control system: System 5000 Todpsxfh S Nofx Ac Nsf Motor power: 4.5 kW Machine weight approx.: 4,400 kg Space requirement approx.: 4300 x 2300 x 1750 mm

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 mm. Tsdpjw Snqmjfx Ac Njf Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Operating instructions and packing included.

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm Tjdpfx Aswtrz Hjc Nef turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m Tsdpfx Acov E R Eis Nef machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: good (used), Max. diameter: 560mm Tjdsv Dvzyepfx Ac Nsf Working length: 3550mm Max. workpiece length: 4000mm

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm Tsdpeua Iw Tefx Ac Nef increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Todpfxot Nfv Ts Ac Nof Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm Tedslp U R Sepfx Ac Nsf stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm