Tapping attachment M20

Edalco EDALMATIC EDM-R520

Condition: used, Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse -Counter holder for the return is missing -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.3 kg Isdpfx Aeb A Sxijb Isa

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece Ijdpedq U S Ijfx Ab Isa -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros Isdpfjd Erdrjx Ab Iea # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: new, functionality: fully functional, machine/vehicle number: 0684, maximum load weight: 40,000 kg, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 780 mm, tire size: 405x260, Year of construction: 2025, Transport Cart TPW 40 AL-PA-AW Type: TPW 40 AL-PA-AW Serial No.: 0684 Year of manufacture: 2025 Payload: 40,000 kg on 60% of the loading area at 6 km/h Dimensions: Loading area length: 4000 mm Width: 2200 mm Height: approx. 760 mm Steering: All-wheel steering with oscillating axle and axle rocker Tyres: 16 heavy-duty wheels 405-260 Iedpfofxgxnjx Ab Ioa Towing drawbar: Drawbar length 1800 mm with safety latch and towing eye according to DIN for 40 mm pin Paint finish: RAL 2000 Transport floor: 50 mm Douglas fir/larch, countersunk and bolted into the frame #HeavyDutyTransport #In-plantTransportSystems #HeavyDutyTrailer6-100Ton #HeavyDutyTrailer3to100Ton #HeavyDutyTransportPlatformCart #PlatformHeavyDutyTrailer #AllWheelSteering #TransportCart

Condition: used, Year of construction: 2025, TPW 30 AL - AS with all-wheel axle steering, rollers 559x300 Transport deck made of Douglas fir wood, 40 mm thick, Dimensions Length 4000 mm Isdpehbmuksfx Ab Isa Width 2000 mm Drawbar 1600 mm with 40 mm towing eye and drop guard with height adjustment Paint finish RAL 2000 #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trolleys #Platform heavy-duty trailers #All-wheel steering #Transport carts

Condition: new, Bernardo surface grinding machine BSG 2040 PLC Technical specifications Table clamping surface 200 x 500 mm T-slots number / width 1 / 14 mm Electro-magnetic clamping plate 200 x 460 mm Max. Travel, longitudinal 560 mm Max. travel travel, crosswise 240 mm Distance spindle center / table max. 450 mm Max. workpiece weight workpiece weight* 180 kg Grinding wheel 200 x 20 x 31,75 mm Table speed, hydraulic 7 - 25 m/min Cross adjustment Automatic feed, transverse 0.1 - 8 mm / stroke Rapid feed, cross 990 mm/min Cross feed per handwheel rotation 4 mm/rev. Graduation on handwheel 0.02 mm Vertical infeed Automatic feed, vertical 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid feed, vertical 480 mm/min Vertical infeed per handwheel revolution 2 mm/rev. Scale division on handwheel 0.005 mm Iedpfegd Ia Sjx Ab Ija Grinding spindle motor 2.2 kW Spindle speed 2850 rpm Hydraulic pump motor 0,75 kW Vertical feed motor 0,5 kW Length 2160 mm depth 1650 mm height 1840 mm Weight approx. 1640 kg * with magnetic clamping plate Scope of delivery - 2-axis digital display ES-12 H with LCD display - Siemens SMART panel IE V3 with touch operation - Electronic handwheel - grinding wheel - Wheel flange - LED work light - Magnetic clamping plate - Balancing stand - Balancing shaft Protective covers - Parallel puller - Demagnetizing device - Coolant device - Extraction diamond - Machine shoes - Central lubrication - operating tool

Condition: new, Bernardo Bohr - and milling machine KF 60 incl. 3-axis digital display and y-feed Technical specifications Drilling capacity in steel 35 mm Ijdjd Du Tlopfx Ab Ija Drilling capacity in cast 40 mm Threading up to M 16 Projection 210-550 mm Spindle head pivot range 90 ° Spindle speed (8) 115-1750 U/min ISO 40 spindle adaptor Quill stroke 125 mm Table size 800 x 240 mm T - slot size 16 mm Swivel table 45 ° to + 45 ° Distance from spindle / table 120-375 mm Travel longitudinal (x) 375 mm Stroke transverse (y) 175 mm Travel vertical (z) 255 mm S1 motor power output 100% 0.85 / 1.5 kW motor power input S6 40% 1,1 / 2,2 kW Machine dimensions (W x D x H) 1300 x 1400 x 2100 mm Weight approx. 750 kg package • 3-axis digital display i200 with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reducing bushing MK 3/2 • Height-adjustable guard • Automatic platen feed x axis • automatic platen feed in Y-axis