Gebr. hydr. press brake

EHT EHPS 15-30

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment Dsdpfjyy Hgqjx Ai Socn :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Capacity: 3100 x 130 tons Year of manufacture: 2011 Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge Dcodpfx Ajzd S Apji Sen

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Dcedpfjw Imq Rex Ai Sen

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: DIMENSIONS: Width: 30 m (Exterior). Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. Dcjdezuar Tepfx Ai Son - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable Dcsdpfx Ajwg Etiji Ssn • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. The machine is still in production. Available for delivery in August 2026. Dcodpfx Aoy I Ak Uji Sen Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Dsdpeu Ngrqefx Ai Sscn Coolant tank with pump and feed *

Condition: used, pressure 50 t Dsdera Rrhepfx Ai Socn chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: new, Year of construction: 2026, functionality: fully functional, Loading, unloading, loading dock, access, mobile ramp 25T ramp, 2.5M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: Manufacturer: TM-GROUP Maximum load capacity: 25 tons Internal ramp width: 2500 cm Ramp barriers on both sides Ramp rollers for easy movement Central handle for moving the ramp with a forklift Angle and flap height adjustment Lubricated moving parts Dcodpfx Aisrp Ekfo Ssn Equipped with a winch Custom ramp dimensions available for an additional fee Height adjustment with motor (optional) ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp grating - galvanized grating with anti-slip grooves: Secure and safe surface. Forklift and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization with the option of disassembly. ✅ Forklift handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. ✅ Solid side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. ✅ Dual-sided manual pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Dodpfsulwg Nex Ai Socn Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.