Mixer

Eirich R15/ RV 15

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Bsdjgqr A Djpfx Andjdi

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Bdedpfx Ajvllxdondsi Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Bedpfeww Em Dex Andjdi Available quantity: 1 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor Bodpfx Anewiatiodjdi With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Bdsdpfeqmi Irsx Andji Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Bdsdsxp U S Dspfx Andei Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp Bdsdpfx Ansxbyx Todji

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, Concrete paver production for slabs complete production line Bsdpfxjy Sinno Andedi fully automatic rotary table topping press Uni 2000/600/7 fully automatic direct washing system Weser 100/2 molds electrical system/control including pallet production

Condition: used, used, good conditionmake Festotype ZA 101machine-No. 2668/SNumber of spindles 3 crosscut sawClamping height 1 x 140 mm 2 x 30 mmCrosscut saw 2,5 HPFence ruler LAS 1750 mm 1000 mm with turret stopWorkpiece clamping pneumaticSpace requirement approx. 1700 mm x 700 mm x 1400 mmPlace of storage 97447 Gerolzhofen, free loaded, unpackedDelivery in as-is condition, as inspectedwithout warranty and guarantee Bedpfx Ansvwffzodedi

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 1.0 kg/dm³ Volume: 105,000 liters Manufacturer: Zeppelin Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 15,000 mm (including 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Bedpfx Anslg Dcfododi Inclination of the upper floor: 15° Inclination of the cone: 60° Equipment and connections: In the upper floor: 1 x access dome DN 500 with hinged cover 1 x ventilation opening with hood 2 x flange DN 100 PN 10 (filling + level indicator) 1 x stub for full-level indicator 1 x roof edge railing with handrail 2 x crane eyes On the shell: 1 x access door 850 x 2000 8 x pipe support for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct 1 x stub for full-level indicator The silo ends at the bottom in a 60° cone with a flange DN 200 (discharge height: approx. 500 mm) and a suction box. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Additional cost: The silo has a two-part ladder with back protection and a landing platform (additional cost: €950 plus VAT). Otherwise, as shown in the pictures and drawing.