Spot welding machine

ElmaTech GmbH MIDIspot Vision QSVM 9000/12000T

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Duedpex Au Tnjfx Aa Not Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. Duedpfx Aox E Ahzsa Njt In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Dodpfxoxq Elws Aa Njut

Condition: good (used), Year of construction: 2007, machine/vehicle number: 05542, Offer 25128 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 68 kVA - Reach adjustable: 280 to 450 mm Duedpfxewn Emls Aa Not - Stroke: 5 to 40 mm - Welding values: sheet steel approx. 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water quantity: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling device

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Dodpfx Ajwzmcbea Neut COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: SI73, Technical data: 1x Demag KBK 1 column-mounted slewing crane, SWL 250kg Safe working load at full outreach: 250kg / 0.25t Dodpfx Aaowv N Eze Nsut Height: approx. 2.83m Underside of jib: approx. 2.3m Jib outreach: 3m Hook height: approx. 1.85m Total weight approx. 400kg including anchor plate 71x71cm With Demag PK chain hoist 250kg Includes pin, cable trolley, travel trolley, end cap, etc. Slewing range: 300° Connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity 80-5000kg, please inquire See images Shipping by freight carrier or collection by appointment only

Condition: new, Year of construction: 2025, Single band console decoiler (1000 mm - up to 1,0 t stationary - Inner φ480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.000 mm Dujdpfx Aefvbv Soa Njt

Condition: used, 2,000 running meters of construction profiles, U-shape Used goods, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 43 kg Negotiated price: € 4.90 net/rm ex stock Djdpfx Aeulwiqoa Neut Available individually or in a package One package consists of 20 pieces - approx. 93.4 running meters Goods are in stock. Transportation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: new, Wisniowski Industrial Sliding Gate 6 x 2 m List Price €16,800 Brand: Wisniowski Description Opening approx. 600 cm Leaf length approx. 800 cm Leaf height approx. 200 cm Including photocell and 1 transmitter Dedjh I Nvbepfx Aa Neut Sliding direction from the street side, right, without galvanized base. Including motor and key Color: Black Photos for orientation Item Condition: New Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min Dedou Nv Easpfx Aa Nsut weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *