2-Axis Teach-In / Cycle controlled CNC

Emco EmcoMat E-300

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Nsdpfx Adjw I S Uuewskt Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Nsdpfxex I Ed Rj Adwokt Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Nedeuwrz Hopfx Adwjkt Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Nsdofk Et Aspfx Adwokt Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Nkedpjg Urz Hefx Adwot Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Nkedpfx Adewu Dq Aowot Spindle power 16 kW Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA Nsdpfsz H Dysx Adwekt throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 23,163 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 2 m/min, torque: 118 Nm, controller manufacturer: Hurco, controller model: MAX5, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, table width: 660 mm, table length: 1,676 mm, table load: 1,360 kg, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, overall weight: 10,900 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 249 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition, Full Package 🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Nkjdpfxjuyt U Tj Adwjt Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table

Year of construction: 2001, condition: good (used), Universal CNC Turning Lathe from Pinacho apply for toolmaker , mold maker, education and Locksmith Turning diameter : 360mm Control : Fagor 8055 Technical data Turning diameter 360mm Turning lenght 1000mm Control Siemens Fagor 8055 Tailstock MK 3 Tools Barufaldi 6 pice Speeds 1-4000U/min Power supply 380V - 5,5 KW Contact person: AWM GmbH Herr Mario Wurm Nksdpfxjfglzgo Adwjt

Condition: excellent (used), diverse steady rests Nsdpfx Adsd E Tb Eewokt