Emmegi PHANTOMATIC CNC machining center

Emmegi PHANTOMATIC T3 A

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, X-axis travel (longitudinal axis) 4300 mm Y-axis travel (transverse axis) 270 mm Z-axis travel (vertical axis) 300 mm Kodovi N H Topfx Abcelp Electrospindle 1 HSD - max 18000 rpm - power 5.5 kW Tool magazine capacity 8 Bevel gearbox for lateral machining Number of vices 4 Vices positioning: automatic Weight 1950 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Company Tekstura d.o.o. sales new FOM Industry machines only in Slovenia. Kodpfx Aboxu Uylscslp

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Kjdpfxsundg Us Abcelp Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm Kljdpfexabztsx Abcep dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Year of construction: 2025, Machine characteristics Our electric pallet truck with a capacity of 1,500 kg is an irreplaceable solution that allows you to easily and effectively move heavy pallets and loads in warehouses, production halls and other logistics places. Ksdoricvdspfx Abcjlp Thanks to advanced electrical technology, both lifting and driving are easy and convenient. The electric lifting system allows loads to be lifted smoothly to the appropriate height, ensuring precision and safety. However, electric driving eliminates the need for physical effort and allows efficient and quiet operation. A pallet truck with a capacity of 1,500 kg is not only efficient, but also reliable. Solid construction and high-quality materials guarantee long-lasting and reliable operation, even in difficult conditions. Thanks to this, you can be sure that the stroller will cope with even the most demanding tasks. Our solution has many advantages, including an ergonomic design that ensures comfort and convenience for the operator. The intuitive control panel allows you to easily maneuver and adjust the driving speed to your needs. The built-in speed control potentiometer is an innovative feature that allows the operator to adjust the travel speed to specific needs. This allows you to precisely control the pace of the trolley's movement, increasing safety and eliminating the risk of collision or damage. Regardless of the size of the warehouse or how crowded it is, our electric pallet truck ensures smooth and precise maneuvering. Operators can easily maneuver around curves, avoid obstacles and precisely place loads where they are needed. This increases work efficiency and saves valuable time. Safety is our priority. Our electric pallet truck is equipped with safety systems such as electromagnetic brakes, a belly switch, horn and protective features that minimize the risk of accidents and damage. One of the key features of our pallet truck is the use of an easily replaceable battery. This way, when the battery runs out, you can easily pull it out and connect it to the charger. This saves time and allows you to work continuously without having to wait for the truck to be fully charged. Practicality and mobility are key in a dynamic warehouse environment. The flap protecting the battery against weather conditions is another innovative feature of our pallet truck. It protects the battery against moisture, dust and other external factors, which increases its durability and reliability. You can rest assured that your battery is properly protected, even in difficult operating conditions. Technical parameters Load capacity 1500 kg Turning radius 1300 mm Height of raised forks 190 mm Height of lowered forks 85 mm Fork length 1150 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage/rated capacity 24/20V/Ah Li-ion Operating time on a charged battery up to 3 hours Charging time 2.5 hours Drive motor power 0.75 kW Lifting motor power 0.8 kW Electromechanical brake Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Dimensions 1700x550x1300 mm

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Kledpex Diqwofx Abcsp Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar Klodsu Nigkjpfx Abcop hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar Kodpfx Aepgmpdjbcslp number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw) Klodpfx Ajycgtbebcep

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments Kledpfewgm Ibex Abcep air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg