Notching Machine

EUROMAC MULTI 220/6 R

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Hfedpfx Ademck Ryswsb Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. Hsdjvxipgepfx Adwsfb X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller Hjdpfx Adogg Nq Hjwefb - foot switch - Brake motor - With 4 roller sets - Emergency stop - 400V

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Hjdpfx Adsd E A I Iowefb Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Hfjdstltl Hopfx Adwjb Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Hfedpfx Asmx Rrlsdwjb Baujahr: 2012

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Hodpfx Adshv U U Djwsfb Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Hsdod Ev Upopfx Adwofb Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, Year of construction: 2025, pressure 40 t stroke 250 mm table-size 625 x 1100 mm flat steel flat 200 x 20 tube diameter max. 2" table height 950 mm work speed 9,1 - 4,7 mm/sec Hfedpfx Asvx Dwrjdwob return speed 45 mm/sec weight of the machine ca. 750 kg dimensions of the machine ca. 1,25 x 0,9 x 1 m total power requirement 3 kW quantity of oil 45 l New hydraulic horizontal bending press with stepless pressure regulation under load, patented tool holder, the BOTTOM cylinder allows 360° bends! Immersion depth and retraction point adjustable by handwheel,stepless feed adjustment. The machine is in the following sizes obtainable: pressure from 22 until 150 t, stroke from 200 until 450 mm. Many tools are in offer for the different kind of bending with additional price list. For more information please look at the video.

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg Hjdovghbqspfx Adwefb SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER NOTE: AUTOMATIC NOZZLE CHANGE