Workshop heaters / room heaters

Ewi-Therm EWI-A 15

Condition: new, Year of construction: 2025, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Efficiency 88,2 Ndjdpjhvibzsfx Aa Aed Energy efficiency class: A+ EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Ndsdpfx Aofgyh Uoa Aed

Condition: good (used), Year of construction: 1998, Was used till 2017. Withth all documentation. With Weishaupt G5/1-d ZMD natural gas burner. Max power is 940 KW Nsdpfx Aasiqb A Ij Asdd

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm Njdpfog Ul S Dsx Aa Aedd reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: good (used), Dividing head with 24 he direct Division or crank to Scala 200 he Röhm feed GES. Height 165 mm Depth 350 mm Width: 300 mm Nodpfxjdx D Rzo Aa Ajdd Weight 34.5 kg

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Ndsdpfx Aou Thypsa Aod Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 300mm Nodpfjixun Tjx Aa Asdd Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net

Year of construction: 2021, condition: new, Directly available from stock List on request 550 pieces = 1x truck load Nedpfxjica Ame Aa Asdd ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, Ndodpfoiqkc Ijx Aa Ajd table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm Ndedpfsfv Attex Aa Aed weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m