Sheet metal folder

FASTI 1000 x 4 mm

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Podew Rm Saepfx Abhspu Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm adjustability of bending beam: 50 mm Ppodev D E R Dopfx Abhju space required: 1880 x 740 x 1140 mm

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° Pedpfeupxcgox Abhopu total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Podpfov Ivx Tjx Abhspu

Condition: used, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance results in significant energy cost savings. • Over 100 synergy curves for almost all base materials (factory-equipped) • Wide process variety: - MIG/MAG Standard - MIG/MAG Pulse - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging with up to 8.0 mm electrode diameter • High-performance machines with up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple, analog integration • 99 memory slots • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program selection via torch button Ppedpfswwtwdjx Abhou • Simple polarity change

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Ppsdpfxsdzqaas Abhju Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: new, Finger-setting machine with a segmented top clamp PNEUMATIC CYLINDER!!! Max. setting capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Psdpfxjga T Dlo Abhopu Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. setting angle ----- 0 - 135 degrees Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, Year of construction: 1992, Technical details: plate width: 1550 mm plate thickness: 2,5 mm distance between columns: 1630 mm knife length: 1550 mm stroke adjustment: Oberwange: 90manuell / 70hydr. mm stroke adjustment: Unterwanne/Biegewanne: 105 manuell mm stroke adjustment: Biegewage: 40 mm Podju Ib Anspfx Abhjpu bending angle max.: 93 (L-/Z-biegen) und 180° Zufalten ° back gauge: nein - no total power requirement: 4,5 kW weight of the machine ca.: 1,8 t dimension machine xH: 2,6 x 1,1 x 1,7 m dimensions of hydaulic: 1400 x 700 x 1480 mm This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters *

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: Pjdpfx Abexaa S Dohopu - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Ppjdpfjy S Abujx Abhou Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg