Drill with magnet

Fein PS 50 R

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Rsdpfeulaxhsx Aazen

Condition: used, machine/vehicle number: 1-1, thickness of jaw:125 mm weight of the machine ca.:30 t Rodpfx Aaecxxl Ajzen clamping width:205 mm

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m Rsdpjfv Attefx Aazsn

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Rsdpfed Eqqqex Aazon

Condition: good (used), Year of construction: 1980, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 1,330 mm, table load: 10,000 kg, table length: 1,700 mm, table width: 1,520 mm, incl. universal milling head incl. spindle extension incl. angle plate height 1400 mm incl. digital read out sytem X - Travel: 1985mm Y - Travel: 1620mm Z - Travel: 1330mm W - Travel: 410mm Table Length: 1700mm Table Width: 1520mm Table load: 10000 Speeds / ranges:2,5 - 1000Rpm Spindle Taper: iso 50ISO/Bt/Mk Length: 460mm Width: 4800mm Rjdjwrn Imopfx Aazon Height: 6000mm Weight: 25000kg

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Rjdpfxswhyw Eo Aazon Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm Redpfevz Abhex Aazsn *

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Redpfx Ajqiz N Reazen Lifting height 9 meters

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm Redpfx Aaervgyxezon

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Rsdpfx Aaocirniezen Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates