Tapping machine

Flott TB6

Condition: used, bore capacity in steel (diameter) 6.0 / 10.0 mm Bsizykunt7G throat 200 mm bore stroke 60.0 mm spindle taper B 12 table: 280 x 260 mm turning speeds 430 - 9000 U/min column diameter 70.0 mm total power requirement 0.45 / 0.60 kW weight 95.0 kg range L-W-H 450 x 300 x 880 mm from a vocational training center (!!) Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual * Machine link: ?machineno=1008-9093645

Year of construction: 1986, Condition: excellent (used), Dimensions LxWxH: approx. 450x300x1700mm Maximum drilling depth: 60mm Maximum workpiece height: 350mm Caesxes90U Table dimensions: 250x250mm Speed: 430 - 9000 rpm. (12 speed levels) 2 motor steps Speed adjustment via V-belt Drill chuck included Inclusive 16 A connection plug Inclusive base frame

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm 9Zav27Xxf3 -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: used, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 36.0 mm throat 280 mm bore stroke 150 mm turning speeds 120 - 1600 U/min table-size 400 x 550 mm morse taper MK 3 feed 0.1-0.2-0.3 mm/U total power requirement 1.5 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - continuous speed adjustment via “VARIO drive” - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Work table with T-slots - Height adjustable via hand crank Csmsati7H3 - adjustable drilling depth stop with mm scale - Coolant device with container - Connection cable + 16A plug * Machine link: ?machineno=1008-9103740

Year of construction: 1985, Condition: good (used), Bench drill TB 15 spindle speed 360 - 3600 rpm via V-belt pulley spindle mounting MK 2 with intermediate table Strohm 400 Volt Dardskd

Condition: ready for operation (used), machine/vehicle number: 13110506, Item number MA1165 Manufacturer Flott Type SB 10 Year of manufacture older Machine-No. 13110506 length [mm] 600 width [mm] 300 height [mm] 1500 Ipmwmdos Weight [kg] 70 Connected load 380V Gear [rpm] 400/4800 Mounting MK 2

Condition: new, Year of construction: 2024, Thread cutting device Free-cutting device Programmable drilling depth cut-off Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Stepless spindle speeds with countershaft, speed range 100-2000 rpm Opt. R2: Stepless spindle speeds with countershaft, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm throat depth 300 mm Usable table surface (swiveling) 590 x 450 mm Feed rate 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor rotary current 400 V pole-changing 1.5/3.0 kW Weight 420 kg Option drilling package no. 6: taper arbor B18/ Mk 4, quick-action drill chuck B18/ 3-16 mm, machine vice no. 2 -140 and T-slot screws, 963.00 EUR Option: automatic spindle stop with drill spindle top, 457,00 EUR Option: chip breaking module 457,00 EUR Delivery: free domicile incl. packaging Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! Bekllhmrw3 FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2024, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 20020F Projection (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor three-phase current 400V with frequency converter (kW) 4.0 Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€ 870.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Year of construction: 2024, Condition: new, Continuous/normal drilling capacity (mm) 20/23 (in E335/ST60) Tapping capacity (pitch dependent) M12 Spindle MK II Drilling depth (mm) 100 throat depth (mm) 240 Column diameter (mm) 82 Usable working area (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display Digital Drilling depth display Digital Drilling depth stop quick adjustable stop ring feed (mm/rev) by hand Table height adjustment with rack motor rotary current 400V with frequency converter (kW) 1,5 distance spindle/working surface (mm) 160 - 880 Machine dimension without packing (mm) 355 x 705 x 1825 Machine dimension with packing (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Hqlvoedg8 Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED illumination Quickly adjustable and ergonomic drill depth stop Infinitely variable speed control via central rotary knob Emergency stop pushbutton Thermal overload protection Spindle stop Drill protection with electrical fuse Connection cable with CEE plug 3 years warranty for one-shift operation Delivery free of charge

Year of construction: 1984, Condition: excellent (used), Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm spindle mounting MK 3 spindle speed infinitely variable by hand lever 140 - 1400 rpm table size 500 x 360 mm drilling depth 150 mm column diameter 125 mm throat 300 mm drive power 1,5 kW weight approx. 350 kg mechanical feed by head pressure Technical data: drilling capacity in steel 32 mm Chtqnbepvj drilling capacity in cast iron 36 mm spindle mounting MK 3 spindle speed stepless 140 - 1400 rpm table size 500 x 360 mm drilling depth 150 mm column diameter 125 mm throat 300 mm drive power 1,5 kW weight approx. 350 kg mechanical feed at the push of a button feed rates: 0.1 - 0.16 - 0.25 mm/revolution thread cutting device coolant device, drilling table lighting operating instructions Connection cable 16 A

Condition: new, Year of construction: 2024, NEW FLOTT SB 25 plus pillar drilling machine - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection V8Rrfaal - Spindle stop - Drill protection with electrical fuse - Continuous/normal drilling capacity (mm): 23/25 - Tapping capacity (depending on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - throat depth (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with toothed rack - Stepless spindle speed (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 For further TECHNICAL DATA, please refer to the product sheet! OPTION Drilling package 4 (296593) - € 595.00 - Vice [felix] 2.0 120 - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) - Taper arbor B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3-year guarantee for single-shift operation Delivery: free domicile incl. packaging (Germany) NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2024, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Uezty2Thlz Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Year of construction: 2024, Condition: new, Standard equipment: robust, high quality and inclined rotation hood for easy speed reading LED illumination quick adjustable and ergonomic drilling depth stop infinitely variable speed control connection cable with SCHUCO plug (1,2 m) low-voltage cut-out drill protection with electrical fuse thermal overload protection emergency stop pushbutton weight in kg: 44 motor kW: 0,45 alternating current 230 V speed 1/min: 250-3000 Drilling capacity mm: - steel Ø 12 mm - aluminum Ø 20 mm - soft wood Ø 40 mm - drilling depth 60 mm - throat 220 mm - column diameter 70 mm - usable table surface (W x L) 300 x 250 mm - T-slot size number 2, distance 100 mm dimensions width 14/26 mm - spindle B 16 - Speed display digital - Drilling depth display: scale B9Wqvqv - Drilling depth stop: quick adjustable stop ring - Feed: by hand - WORKING WARRANTY: 3 years - free of charge incl. packing - Option warranty extension to 5 years 300 €

Condition: new, Year of construction: 2024, Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vice Switch-off at the end of the cut, return of the saw arm to the starting position Torsion-resistant cast steel saw frame (ribbed several times) Hydraulic short-stroke cylinder for vice Precisely ground carbide saw band guides, adjustable Electric coolant pump Manual band tension with display, incl. electrical band saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Rotating saw brush Large-dimensioned solid round support table, rotating for mitre cuts with pre-set cutting channel, manual mitre adjustment, reading via scale Material stop 500 mm with scale Incl. saw blade combi toothing 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor three-phase current 400 V, frequency-controlled 1.5 kW Saw band dimensions 2910 x 27 x 0.9 mm Flywheels Ø 325 mm Cutting speed 20-120 m/min. Vice clamping width 320 mm Working height 760 mm Sawing range: at O° = round D 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight 420 kg Free delivery incl. packaging Wbexthb0W Please ask for further accessories. Delivery time: immediately from stock. NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Year of construction: 2023, Condition: new, Free cutting device Drilling depth shut-off programmable Drilling depth and speed display - digital thread cutting device M20 ( pitch dependent) infinitely variable speed from 125 - 4000 rpm in two steps, step change via belt reversal. drilling capacity 25/30 mm spindle MK 3 drilling depth 125 mm throat 280 mm Usable table area (swiveling) 420 x 340 mm feed 0-300 mm/min stepless Table height adjustment with toothed rack Machine dimension (W x D x H) 520 x 820 x 1900 mm motor rotary current 400 V pole-changing 0,9/ 1,45 kW weight 300 kg OPTION: - Drilling package 5 consisting of: taper arbor, drill chuck, vice and T-slot set (€ 790,-) - Spindle stop and chip breaking module (€ 770,-) DELIVERY: free of charge incl. packing NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER Bdb3Dqve

Year of construction: 2023, Condition: new, NEW - ex works Drilling depth and speed display - digital with background lighting tapping capacity M30 ( pitch dependent) optional: R1 spindle speed with primary reduction gear infinitely variable, speed range 100-2000 1/min optional: R2 spindle speed with primary reduction gear infinitely variable, speed range 70-1400 1/min drilling capacity 35/40 mm spindle MK 4 drilling depth 160 mm throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed by hand Table height adjustment with rack Hpn0Bcl Machine dimension (W x D x H) 610 x 850 x 1920 mm motor rotary current 400 V pole-changing 1,5/3,0 kW weight 420 kg Optional: Thread cutting device via digital drilling depth display Price: € 1.028 3 years warranty NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT POINT PARTNER

Condition: new, Year of construction: 2024, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 27/32 mm - R2 25/30 mm Tapping capacity max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Projection (mm) 300 Column diameter (mm) 125 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 370 Optional drilling package 5 (€ 835.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-action drill chuck B18 Ii3Io7E3 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2024, - FLOTT SB 20 FB plus flow forming machine - Tapping unit - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug Flow forming for the production of pull-throughs in thin-walled metallic materials, Dpgjp9 Flow forming capacity with 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with toothed rack - Stepless spindle speed (rpm): 20 - 4,000 - Dimensions (mm): 355 x 705 x 1825 For further TECHNICAL DATA, please refer to the product sheet! 3-year guarantee for single-shift operation Delivery: free domicile including packaging (Germany) NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2025, with suction automatic grinding belt centering tool-free change of the sanding belt abrasive belt grain 60 2000x mm belt width 150 mm surface grinding range 500 mm belt speed 15/30 m/s weight 120 kg Motor pole-changing 2,2/ 3,75 kW Suction motor 0,37 kW Lzoqh Machine dimension 950 x 430 x 1050 mm Scope of delivery: incl. sanding belt grain 60 dust bag 1 year warranty Delivery: free of charge incl. packing (Germany)

Condition: new, Year of construction: 2024, Delivery time: immediately from stock continuous/normal drilling capacity 35/40 mm Tapping capacity max. M30 (pitch dependent). 2Johiqzz Manual reversing switch for right/left rotation. Undervoltage release, thermal overload protection, spindle MK 4 Drilling depth 160 mm throat 300 mm Column diameter 110 mm Usable table area [WxL] 420x340 mm Speed indicator scale Drilling depth display scale Drilling depth stop with fine adjustment Table height adjustment with rack Motor rotary current 400 V pole-changing 1,5/3 kW spindle speed with primary reduction gear infinitely variable 100-2000 1/min Machine dimensions (WxDxH) 610 x 850 x 1920 mm weight 420 kg Delivery: free of charge incl. packing. WORKING WARRANTY: 3 years NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT POINT OF SALE PARTNER

Year of construction: 2024, Condition: new, - Infinitely variable speed control - Quick adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via toothed rack - LED illumination in head - Continuous/normal drilling capacity 20/23 mm - Tapping capacity max. M 12x1 - spindle MK II - drilling depth 100 mm - throat depth 260 mm - column diameter 110 mm - Usable table area (W x L) 420 x 340 mm - T-slot size (arm): Number 2, distance 125 mm - Speed display Digital - Drilling depth display digital - Drilling depth stop fast adjustable - feed by hand - motor rotary current 400 V Bexvzw39F0 - spindle speed infinitely variable 30 - 3.000 1/min option: coolant device: € 560,- WORKING WARRANTY: 3 years DELIVERY: free domicile incl. packing NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2024, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre D0Ezfi Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: new, Year of construction: 2024, Standard equipment: robust, high quality and inclined rotation hood for easy speed reading LED illumination quick adjustable and ergonomic drilling depth stop infinitely variable speed control connection cable with SCHUCO plug (1,2 m) low-voltage cut-out drill protection with electrical fuse emergency stop pushbutton Technical data: Weight in kg: 30 motor kW: 0,45 alternating current 230 V speed 1/min: 250-3000 Drilling capacity mm: 10 - steel Ø 12 mm - aluminum Ø 20 mm Bgndf09M - soft wood Ø 40 mm - drilling depth 50 mm - throat 180 mm - column diameter 50 mm - usable working surface WxL 300 x 200 mm - T-slots, number 2, distance 100 mm dimensions width 12/20 mm - spindle B 16 - Speed display digital - Drilling depth display scale - Drilling depth stop: quick adjustable stop ring - Feed by hand - WORKING WARRANTY: 3 years

Condition: new, Year of construction: 2024, Spindle speed infinitely variable electronic 40-4000 1/min Spindle holder MK 2 Table height adjustment with toothed rack Tapping capacity max M8 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/ by hand Table height adjustment with toothed rack Continuous/standard drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm throat depth 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg max distance spindle/table/foot 300/ 360 mm Motor alternating current with frequency converter 230 V, 0.54 kW OPTION: Bhh7Pvkg Drilling package no. 2 - Vice felix, jaw width 80, clamping width max 120 mm - Quick-action drill chuck 1-13 mm holder B16 - Taper arbor MK II/B16 - Reducing sleeve MK II/ MK I Price: € 320,- Factory guarantee: 3 years Free delivery including packaging (Germany only) Delivery time: immediately from stock

Condition: new, Year of construction: 2024, Standard equipment: With swivel head (left/right) for miter cuts, two speeds, Sturdy cast iron construction of the machine housing, Reduction gear in oil bath, consisting of bronze wheel and hardened, hardened, ground steel worm. Quick-clamping vice with counter-clamping device for double workpiece clamping. Durable, mechanical coolant pump Adjustable length stop Operating tool Machine color: RAL 7037 Technical data KS 315 M Motor three-phase current 400 V, pole-changing (kW) 1.3/1.9 Vice clamping width (mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine dimensions with base frame (mm) 1,000 x 1,100 x 1,800 Machine dimensions 12 months warranty for single-shift operation Not included in the scope of delivery: Saw blade (mm) Ø 315 x 32 Steel base frame Dps8Qj