Long belt sander

HÖFER BSM II

Condition: used, mileage: 1,67,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area Ijdpfx Aoww Sgdjdweht * Mobile office package 1 * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Errors and omissions excepted.

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Ijdpjvzramsfx Adweht Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: used, mileage: 1,49,351 km, power: 62 kW (84.30 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 11/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2012, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Engine failure - timing belt has jumped. Features: - Truck registration - 2 sliding doors (LEFT + RIGHT) - Wooden rear panel Other: Isdpfx Adsv Sd U Reweht - Various loading options - Registration service - Delivery within Germany possible for an additional charge Viewing is also possible without prior appointment: Mon. - Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Telephone: Email: Further information can be found at We speak German / English / Russian / Italian / French / Spain More Information Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, machine/vehicle number: G-KR114450H, SCM panel saw, good condition, 5.5 kW, approx. 700 kg Ihjdpfjvw Ec Hex Adwst Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Isdpfxeuxqzue Adweht Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. Ihedpfouxnyujx Adwst - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition Ijdpfx Ajrigxysdweht

Condition: used, Year of construction: 2022, Used Machine Year of Manufacture: 2022 Features and Technical Data: - Ideally suited for demanding craftsmen and joiners/cabinetmakers - Extra-long, one-piece surfacing tables ensure easy and precise jointing of workpieces - Working tables are made from cast iron, making them highly durable and permanently flat; simultaneously opening surfacing tables with spring-loaded supports enable quick and convenient changeover - Fixed-mounted extraction hood means no need to disconnect the extraction hose during changeovers, saving valuable working time - Helically-geared steel infeed roller for consistent and even timber feed - Rubber outfeed roller at the thicknesser exit ensures uniform wood discharge - Four feed speeds for material transport - Thicknessing table adjustment by handwheel with integrated height display - DIGITAL version: with electric thicknessing table height adjustment and digital readout - Start/Stop switch located at operator position - Powerful industrial motor Ihjdpfx Adox Hbrnjwet - High machine weight guarantees maximum precision and smooth operation - Prepped for long-hole drilling attachment - Quality Made in Italy - Equipped with spiral cutterhead - Fitted with foldable cutterhead guard - Total table length: 2,250 mm - Maximum cutting depth: 5 mm - Working width: 520 mm - Thicknessing height range: 3 – 240 mm - Number of knives: 66 pcs - Cutterhead speed: 5,000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2,250 x 1,440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Ihsdpfjgq Un Aox Adwjt Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: The Yunnei DEF20CFF4 engine with 61 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size, weight, and high lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, a rearview camera, heating, ventilation, and a radio with MP3 and USB. This allows you to complete even longer jobs comfortably and safely. Ihedpfxeul Ab Se Adwet H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518 Farm Loader • Fully equipped • Extensively optimized in Germany • Powerful and versatile – versatile use • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • Rearview camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for trailer use • 220V coolant preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Unloading height: 2279 mm (standard bucket tipped out) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.