Cut to length machine

FORSTNER COMPACT

Condition: new, Year of construction: 2025, The Forstner POWER COMPACT PRO combines maximum cutting performance and minimum space requirements. It is used in larger companies with serial production. The size of the components is the decisive factor for the advantages you want to benefit from. At its core is a robust and reliable automatic straightening unit with six rolls and a powerful longitudinal divider that can be equipped with the desired number of knives. . Output 2.00 mm at 400 N/mm². Equipment: 5 tons uncoiler (multiple solution possible) Ijdpsma Sbtsfx Adwsht Lifting table Roller infeed hopper Feeding table Automatic straightening unit with MOP function (no standstill markings) 5 pairs of slitting knives motorized guillotine shear touch control speed 25m/min (optional up to 45 m/min) options like guillotine shear extension, stacking unit or recoiling function possible

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line Isdpsvtpcisfx Adweht 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: used, Year of construction: 2010, functionality: fully functional, Used longitudinal and transverse cutting line Manufacturer: Forstner Year of manufacture: 2010 Performance: 2.00 mm at 400 N/mm² Ihjdpfx Aexvqzhjdwjt Equipment: - Motorized 3-ton decoiler with pressing arm - Material lifting table - Control: Siemens PLC - Speed: 25 m/min - Standard feed shaft - Standard feed table automatic straightening unit: - Straightening rollers: Programmable (MOP) - Straightening shafts: Standard Slitting: - Upper shaft adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs Cross cutting: - Guillotine shear Additional equipment: - Light barrier unit - Manual 500 kg decoiler - Recoiling unit . Photos are currently being taken at the customer. The machine can be inspected on site by arrangement (Stuttgart area). Dismantling will take place around February 2026. No guarantees or warranties on used machines.

Condition: excellent (used), Year of construction: 1999, max. working width: 2520 mm for sheets up to: 1.5 mm Opening width upper beam: 180 mm Ihedeqi Awwspfx Adwot Adjustability of folding beam: 40 mm Bending angle adjustment: 135 ° Weight: 1970 kg Space requirement: 3630 x 750 x 1250 mm

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Isdpsfg E Hpjfx Adweht reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Ihjdpfxshzbipo Adwjt Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2018, condition: used, New: Yes Field of application: Construction Please contact KEY-TEC Sales for more information Isdpsg Uqp Iofx Adweht

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m Iodpfxjfv H Dko Adweht The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: like new (used), Year of construction: 2024, operating hours: 60 h, functionality: fully functional, cooling capacity: 497 kW (675.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,364 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 2,200 mm, total length: 5,645 mm, total height: 2,530 mm, warranty duration: 6 months, power: 244 kW (331.75 HP), input current: 392 A, heating capacity: 492 kW (668.93 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, Chiller / Heat Pump Trane Type: CXAF150 SE XLN Year of manufacture: 2024 Operating hours: approx. 60h R454B Cooling capacity: 497 kW - 7/12°C - 35°C Heating capacity: 492 kW - 50/55°C - 7°C COP cooling: 3.05 COP heating: 2.62 Scroll compressors 3/3 2 circuits EC fans – Extra low noise Available Ihedpfx Aow Idkuodwot Trane warranty: until 22/05/2026

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Iedpfx Aevrxnxsdwoht Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.