Material handler

Fuchs MHL434

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Fsdpfeyh A Iiox Adaspd Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading machine overhauled and fitted with a new digital touchscreen Fpedpfx Aowzg E Nedasd

Condition: used, Year of construction: 2019, Sennebogen 835 M-HDS Series E - Tier 4 / EPA Year of manufacture: 2019 Cummins engine - EPA - Tier 4 / Stage V, 231 kW MP34 HDS mobile undercarriage Drive control via single accelerator pedal Solid rubber tyres 16.00-25 (4-piece) Joystick steering Additional counterweight, 0.8 tonnes Cab adjustment: E270 Maxcab Maxcab Industry with front and roof windscreen Comfort operator's seat, air-suspended Safety belt, 2-inch Front guard for windscreen, Maxcab Industry Sun blind for roof window, Maxcab Industry cab Sun blind for windscreen, Maxcab Industry cab Radio with USB, SD, MP3, Bluetooth Catwalk on cabin side, with bolted railing Railing on upper carriage (Boxing ring) Fodpfx Adsxu U Eusaspd Sennebogen Hydro-Clean filter for hydraulic oil K18 working equipment – 10.1 m + 7.9 m (59’) 20 kW generator 1 LED work light on the cab roof (rear-facing) 2 LED headlights on the stick (1 left, 1 right) 1 LED light on the lower boom

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: Fjdpfx Adotrd Hfoaspd - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Fodpfx Adswuppwjajpd Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 4,762 h, Liebherr L 524 Wheel Loader ONLY 4762 HOURS Manufacturer: Liebherr-Werk Bischofshofen GmbH (Austria) Model / Type: L 524 Vehicle Identification Number (VIN): VAT074487B010144 Year of manufacture: 2004 Very good condition CENTRAL LUBRICATION ONLY 4762 OPERATING HOURS Engine power: 81 kW / 110 HP Maximum speed: 33 km/h Permissible total weight: 12,700 kg Permissible axle load: Fpsdowxy Nijpfx Adasd Front axle: 6,500 kg Rear axle: 7,000 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Fpodpjvryhgjfx Adasd

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, Fedjx Aktwepfx Adaepd - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Fpedpfxexwkuqo Adasd Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 Fpodpsx Akq Nefx Adaod - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.