Hot air oven-FlowCook Type FLC 14000/600

GEA-CFS Hete-lucht-tunnel, Type FLC 14000/600

Condition: used, functionality: fully functional, The FRIGOSCANDIA FF-2-RMA IQF (Individual Quick Freezing) tunnel freezer is a continuous freezing system designed for food products that require individualized quick freezing, such as seafood, fruit, vegetables, sliced meats or pre-cooked products. Its linear design with forced air flow guarantees homogeneous cooling, avoiding block formation and preserving Bwjdpfx Abewn Hd Soceh product quality. Applications: Fishing industry: Shrimps, prawns, fish fillets, mollusks. Fruit and vegetable industry: Whole or chopped fruit, vegetables, pulses. Meat and meat preparations: Meatballs, chicken strips, vegetable burgers. Precooked products: Pasta, rice, ready-to-cook mixes. Production depends on the product, in peas for example it would give: 850 kg/h. Inlet temperature: +15ºC Outlet temperature: -18ºC Production may vary depending on the product.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW Bedpsul T Icsfx Abcswh

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee Bsdpfovf Iuzex Abcowh

Condition: like new (used), Vacuum filler VF 608 Handtmann Stainless steel Power: 3kW Bwsdpfxox Aypzs Abcjh Voltage: 400 / 50Hz

Condition: used, Vemag vacuum filler Bwjdpjwx Hcpofx Abceh -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Number of hours worked: 12772 -Weight: 1300 kg -Condition: Used in very good condition

Condition: like new (used), Year of construction: 2009, total length: 5,800 mm, total width: 2,500 mm, total height: 2,700 mm, product height (max.): 60 mm, YOM: 2009 Model Number: 16-18-135 Belt Width:410mm No of Tiers: 18 Tier Pitch:135mm Max Product Height: 60mm 67mm gap Effective Belt Length: 150m Belt Type: 410mm wide plastic belt Max Installed Power: 6 Kw FootPrint Size: 2500mm W Bedpfx Aewya I Iebcewh 5800mm L

Condition: like new (used), VF 200 vacuum filler All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Bjdpfx Absxulh Hjcjwh

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. Bsdpfewnzahjx Abcewh FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, Integrated vacuum pump 20 m³, Double screw, Standard double screw housing, Control: PC, Program memory for 99 filling programs, Portion weight: from 5 up to 60,000 g, Lifting and tipping device for HPC with 250 l hopper, To fit standard trolley, 200 l capacity, Machine dimensions in cm: Width: 134.0 Length: 220.0 Height: 200.0 Power: 9.5 kW Voltage: 380 V, 50 Hz Bsdjw Up Ncjpfx Abcewh Weight: 1300 kg

Condition: like new (used), Year of construction: 2022, We offer the NOWICKI TYPHOON 90 KN-90 high-speed bowl cutter 2022 – a professional machine for the production of meat stuffing, fat emulsions, raw peel mashes, as well as vegetarian products and pet food. This is a modern TYPHOON series bowl cutter, designed for use in meat, fish, fruit and vegetable processing plants and ready-made meal production, where very fine grinding, uniform product structure and high process repeatability are important. The KN-90 cutter is equipped with a 90 l bowl and a high-performance knife system, which at high rotational speeds allows for ‘cutting in the air’, so that the stuffing does not overheat and retains the desired structure and colour. Stuffing mixing system through reverse rotation back. The electronically controlled drive allows for precise adjustment of the knife shaft and mixing speed, while the touch screen control panel facilitates operation and storage of ready-made technological programmes. The cutter has compact dimensions of 2200 x 1600 x 1630 mm, and the separate electrical cabinet has dimensions of 1000 x 500 x 1500 mm, which facilitates the installation of the set in an existing production hall. The robust, heavy-duty construction, made of stainless steel, meets the hygiene requirements of the modern food industry. Bedpfxex H St Aj Abcswh Technical data: Manufacturer: NOMA Nowicki Machinery Series: TYPHOON 90, Type: KN-90 Year of manufacture: 2022 Bowl capacity: 90 l Power supply: 3×400 V, 50 Hz Power: 39 kW Rated current: 91 A Cutter dimensions: 2200 x 1600 x 1630 mm Electrical cabinet dimensions: 1000 x 500 x 1500 mm Advantages of the NOWICKI TYPHOON 90 KN-90 high-speed cutter: High-speed cutting system – very fine grinding of stuffing and emulsion with short processing time. Homogeneous product structure – the optimal shape of the bowl and the operation of the knives ensure a smooth, repeatable consistency of meat, vegetable and pet food stuffing. Modern control – touch panel, possibility to save technological programmes, full control over speeds and processing time. Universal application – red meat, poultry, fish, vegetables, fruit, plant products and animal feed. Construction – solid steel frame adapted to intensive work in industrial conditions.