Torque wrench

GEDORE TORCOFIX -Z 40-200 Nm

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. Ksdpoiy Dw Hsfx Abceww LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Please feel free to contact us at any time.

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Kwsdpfoif Rlbox Abcsw Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Kwodpfx Ajmhhf Ssbcew We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet Ksdpfxjm Tv Aze Abcoww

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm Kwedpfx Asiuh E Ijbcow cutting length 38 mm freshly ground and coated Material HSS Co

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. 2,500 x 2,500 mm, 60 ton. Kodpewdiwajfx Abcoww Linear travel 2,500 mm. Tilting 10°. Continues rotating. Linear measuring system Heidenhein LC 185.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer Kwodpfx Ajum Uzajbcow - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: like new (used), Zero point clamping system Kwedpfohlu Nzex Abcow For rotary table: Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm. For clamping plate: Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ Kodpfjdtyx Eex Abcoww 6 Kw 9 A 24 Vaux 500 VI 54 IP R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, FOR SALE: Dimplex Koolant Koolers Industrial Chiller Kwjdpsv U Ah Iofx Abcsw Model: HOV7500-2PR-SS-NF-FILT-SI Manufacturer: Dimplex Thermal Solutions (Kalamazoo, MI, USA) Serial Number: 31109 Specifications: Compressor Horsepower: 7.5 HP Pump Horsepower: 2.5 HP Refrigerant: R407C – 18 lbs Power Supply: 460V / 3 Phase / 60 Hz Full Load Amps: 25 A Condition: Used under 100 hours, connected to a project that was canceled before start, fully functional. Designed for high-performance cooling in demanding environments. Applications: Ideal for CNC machines, laser equipment, welding systems, plastics processing, and other heat-sensitive industrial operations. Location: Sremska Mitrovica, Silicon Plus doo.