Lathe / turning machine

Gildemeister MF-Twin 300

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 Fpodpfoqn A Rgsx Adajd toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: good (used), Year of construction: 2007, max. wheel diameter 400 mm gear width 250 mm max. module 8 min. module 0,5 root circle diameter 10 mm Fodpfxeyclrpe Adaopd number of teeth 5 - 999 ical angle +/- 45 ° weight 12.5 t With Hoffmann filter system: Year of manufacture: 2006 Filter no. 05919 - Type HSF 100 SEK • Grinding wheel flange • 1 grinding wheel • 1 original dressing device • 1 set of dressing wheels • 1 sensor -> Very good condition, only 22,500 operating hours

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Fjdpfxov Uqcgs Adaepd

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg Fpedpfskvpnmox Adasd with machine chip conveyor with pomps low hours machine

Condition: used, Gainsborough bagger and All-Fill powder depositor. Fjdpfsvvpphsx Adajpd

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Fpodpfx Ajrfw Nhsdaed Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Fodpfx Aovr Eh Eedaopd Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 1,01,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Fsdpfx Aovl Dl Aedaopd Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1988, tail stock ja ja Fpedpfxeu Su I Eo Adaed condition nicht geprüft weight of the machine ca. 3,8 t

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm DBC Turning Length: 6000mm Spindle bore: 260mm Spindle power: 28kW Bed width: 650mm Fpsdpfx Aswvtg Ajdasd Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg